JVC SR-MV30 Instructions Manual Download Page 68

Page: 68 / 92

Filename [SR-MV30U_09Editing.fm]

Masterpage:Left+

Page 68

March 30, 2004 5:46 pm

EDITING

You can use your unit as the source player or as the recording
deck.

NOTE:

When using another recorder as the recording deck, refer to its
instruction manual.

Make connections.

When using this unit as the recording deck

If the another recorder has no S-VIDEO connector, connect the

unit’s AUDIO/VIDEO INPUT connectors to the audio/video output
connectors on another recorder.

If the another recorder has S-VIDEO connector, connect the

AUDIO INPUT and S-VIDEO INPUT connectors to the audio and
S-video output connectors on another recorder.

●

If connecting a unit with an S-VIDEO connector, it is recommended to
use the supplied S-Video cable to minimize picture degradation while
editing.

Press

VCR/DVD

repeatedly to select the recording deck.

Press

CH +/–

to select “L-1” when using this unit as the

recording deck.

●

Set “REAR AUX L-1” to “VIDEO” for the VIDEO input connector, or
“S-VIDEO” for the S-VIDEO input connector, depending on the
connector being used. (

墌

pg. 74) This setting is also applied to the

VCR deck.

For VCR deck only

Set “PICTURE CONTROL” to the appropriate mode. (

墌

pg. 75)

Press

REC MODE

repeatedly to set the recording mode.

Engage the Play mode of the source player.

Engage the Record mode of the recording deck.

Stop recording on the recording deck, then stop playback on the

source player.

NOTES:

●

All necessary cables can be obtained from your dealer.

●

When you use this unit as the source player for editing, be sure to set
“SUPERIMPOSE” to “OFF” before starting. (

墌

pg. 74)

●

When you select “EDIT” to dub tapes in step

, be sure to select

“AUTO” (or “NORM” when “VIDEO CALIBRATION” is set to “OFF”)
after you finish dubbing the tapes.

Edit To Or From Another Recorder

Player

Your unit

Another recorder

Recorder

TV receiver

Slide the

TV/CABLE/DBS/DVD

switch to

DVD

SR-MV30U_00.book Page 68 Tuesday, March 30, 2004 5:46 PM

Summary of Contents for SR-MV30





























































































Search results

Summary of Contents for SR-MV30

Reviews:

Related manuals for SR-MV30

Brands by name

Popular brands

JVC SR-MV30, Instructions Manual

Search results

Summary of Contents for SR-MV30

Reviews:

Related manuals for SR-MV30

Brands by name

Popular brands