Filename [SR-MV30U_04Name.fm]
Masterpage:Left+
20
EN
Page 20
March 30, 2004 5:46 pm
INITIAL SETTINGS
Perform clock setting only if the clock has not been set correctly by
the Plug&Play setting.
Semiauto Clock Set
You can change the host channel/D.S.T. (Daylight Saving Time)/
time zone setting manually.
NOTE:
The time set previously will be erased when “AUTO CLOCK”, “HOST
CH”, “D.S.T.” or “TIME ZONE” setting is changed.
1
Press
VCR/DVD
repeatedly so that the DVD lamp lights up on
the unit.
2
Press
SET UP
to access the Main Menu screen.
3
Press
w e
to select “INITIAL SET UP”, then press
ENTER
.
4
Press
w e
to select “CLOCK
SET”, then press
ENTER
.
5
Press
rt
to select “AUTO
CLOCK”, then press
ENTER
.
Press
rt
to select “ON”, then
press
ENTER
.
6
Press
rt
to select “HOST
CH”, then press
ENTER
.
Press
rt
to select “AUTO” or the
desired PBS channel number, then press
ENTER
.
NOTE:
Some PBS channels do not transmit clock setting data.
7
Press
rt
to select “D.S.T.”, then press
ENTER
. Press
rt
to
select the desired setting, then press
ENTER
.
AUTO
: Select if you want to adjust your unit’s clock automatically by
the incoming signal from the host channel. Be sure to select the
correct time zone manually in step
ON
: Adjustment will be made by the built-in clock itself.
OFF
: Select when Daylight Saving Time does not apply to you.
8
Press
rt
to select “TIME ZONE”, then press
ENTER
. Press
rt
to select “AUTO” or the desired time zone, then press
ENTER
.
●
Each time you press
rt
, the time zone changes as follows:
{
AUTO
{
ATLANTIC
{
EASTERN
{
CENTRAL
{
MOUNTAIN
{
PACIFIC
{
ALASKA
{
HAWAII
{
(back to the beginning)
NOTE:
If an incorrect time is displayed by the Plug & Play function, you may be
receiving the clock setting data of a PBS channel from an adjacent time
zone or from an incorrect PBS channel from a cable TV system. If you
selected “AUTO” for the host channel in step
, be sure to select the
correct time zone manually.
9
Press
SET UP
to complete the setting.
Manual Clock Set
1
Press
VCR/DVD
repeatedly so that the DVD lamp lights up on
the unit.
2
Press
SET UP
to access the Main Menu screen.
3
Press
w e
to select “INITIAL SET UP”, then press
ENTER
.
4
Press
w e
to select “CLOCK
SET”, then press
ENTER
.
5
Press
rt
to select “AUTO
CLOCK”, then press
ENTER
.
Press
rt
to select “OFF”, then
press
ENTER
.
6
Press
rt
to select “TIME”,
then press
ENTER
. Press
rt
until the desired time appears,
then press
ENTER
to start clock.
●
Set the date and year in the same
way.
●
Holding
rt
changes the time in 30-minute intervals, or changes the
date in 15-day intervals.
7
Press
rt
to select “D.S.T.”, then press
ENTER
. Press
rt
to
select the desired setting, then press
ENTER
.
ON
: Adjustment will be made by the built-in clock itself.
OFF
: Select when Daylight Saving Time does not apply to you.
8
Press
SET UP
to complete the setting.
Clock Set
●
Turn on the unit.
●
Turn on the TV and select the video channel (or AV mode).
●
Slide the
TV/CABLE/DBS/DVD
switch to
DVD
.
1
4
7
2
5
8
0
3
6
9
ENTER
SET UP
rtw
e
VCR/DVD
IMPORTANT:
Turn off the unit after performing Semiauto Clock. “AUTO” will appear
on the front display panel while the clock is being set. The current
clock time will appear automatically when the clock setting is
complete.
Auto Daylight Saving Time
This function enables automatic adjustment of the unit’s clock at
the start and end of Daylight Saving Time.
With Auto DST activated, —
— on the first Sunday of April at 2:00 AM, the clock is adjusted
to 3:00 AM.
— on the last Sunday of October at 2:00 AM, the clock is
adjusted to 1:00 AM.
NOTE:
Timer recording may not function correctly at the time Daylight
Saving Time is adjusted.
SR-MV30U_00.book Page 20 Tuesday, March 30, 2004 5:46 PM
