JVC SP-PWR1, Instructions Manual

Page: 54 / 100

TIMER RECORDING
Page 51Monday, 28 March 2005 21:23
Filename [TH-R1R3EU_07Timer Recording.fm]
Masterpage:Left+
51
On-Disc Timer Programming is a function used with discs that are
especially intended for a specific programme. The disc is then
programmed for a programme you always watch every day or
every week. Since older programmes are automatically
overwritten, a single disc can be used without worrying about how
much recording capacity remains. You can programme each disc
to timer record as many as 8 programmes up to 30 days in
advance.
To Make The Disc For On-Disc Timer Programming
1
Press PROG to access
the Programme Check
screen.
2
Press selection keys to
select A DISC TIMER
PRGM B , then press
ENTER .
●
When some
programmes are
recorded on the disc, a
caution message
appears. You can either format the disc (
A
pg. 83) or insert a
new disc, then re-perform the procedure from step 1 .
●
When On-Disc Timer Programming has already been made on
the disc, press
selection keys to select A NEW TIMER
PROGRAMME B , then press ENTER .
3
Press selection keys to
set the desired date
(
A DATE B ), then press
E
.
4
Press selection keys to
set the desired start time
(
A START B ), then press
E
.
●
Each press of
F G
increases/decreases the
start time in 1 minute
interval.
●
To increase/decrease the
start time in 30 minutes interval, press and hold
F G
.
5
Press selection keys to set the desired stop time ( A STOP B ),
then press
E
.
●
Each press of
F G
increases/decreases the stop time in
1 minute interval.
●
To increase/decrease the stop time in 30 minutes interval, press
and hold
F G
.
6
Press selection keys to set the desired channel ( A TV PROG B ),
then press
E
.
7
Press selection keys to set A DAILY/WEEKLY B , then press
E
.
●
For details on A DAILY/WEEKLY B setting, refer to A Daily/Weekly
Recording Function B (
A
pg. 49).
8
Set the other recording
options as required.
●
A VPS/PDC Recording B
(
A
pg. 50)
●
A Recording Mode B
(
A
pg. 39)
●
A Modify Title Name B
(
A
pg. 58)
9
Press ENTER to access
the Programme
Confirmation screen.
10
Press ENTER to complete A To Make The Disc For On-Disc
Timer Programming B .
●
To programme another timer using A To Make The Disc For On-
Disc Timer Programming B , repeat steps 1
-
10 .
11
Press AUDIO
A
to turn off the power.
●
is displayed on the front display panel.
●
To disengage the timer mode, press AUDIO
A
again.
On-Disc Timer Programming
●
Make sure that the unit’s built-in clock is set properly.
●
Turn on the TV and select an input mode such as EXT1.
●
Load a DVD-RAM or DVD-RW (VR mode) disc for
programming.
ATTENTION:
●
On-Disc Timer Programming is possible only with the disc for
On-Disc Timer Programming.
●
If data is recorded on a disc for On-Disc Timer Programming
using a unit from another manufacturer, On-Disc Timer
Programming may not function properly.
1 2 3
4 5 6
7 8 9
0
VOL
SAT
TV
AUDIO
PROG
DVD
AUDIO A
( FGDE )
ENTER
Selection Keys
Satellite Receiver Users
To timer record a satellite broadcast using On-Disc Timer
Programming:
A
Perform On-Disc Timer Programming.
B
Set the satellite receiver to the appropriate channel for
recording.
●
Leave the satellite receiver’s power on.
PROGRAMME CHECK
DATE
++++++++++++++++++ NEW TIMER PRO+++++++++++++++++
START-STOP TV PROG VPS/PDC REC MODE
DISC TIMER PRGM
SELECT WITH [CURSORS]
THEN PRESS [ENTER]
DAILY/WEEKLY
OK
SELECT
PROG
EXIT
LP
DISC TIMER PRGM
DATE START STOP TV PROG
05/07 SAT
DAILY/WEEKLY VPS/PDC
OFF
NAME
SET TIMER PROGRAMMING WITH [CURSORS]
THEN PRESS [ENTER]
WEEKLY
REC MODE
CONFIRM
SELECT
PROG
EXIT
LP
YORN 1 20:30 18:30
DISC TIMER PRGM
DATE START STOP TV PROG
05/07 SAT
DAILY/WEEKLY VPS/PDC
ON
NAME
SET TIMER PROGRAMMING WITH [CURSORS]
THEN PRESS [ENTER]
WEEKLY
REC MODE
CONFIRM
SELECT
PROG
EXIT
TH-R1R3EU_00.book Page 51 Monday, March 28, 2005 9:23 PM