JVC RX-ES1SL Instructions Manual Download Page 267

Page: 267 / 280

Creating realistic sound fields

Press TEST to check the speakers output
balance.

“TEST L” starts flashing on the display, and a test tone comes out
of the speakers as follows:

Adjust the following speaker output levels
(from –10 dB to +10 dB).

• Make adjustments so that the sound level of the selected

speaker is set at the same level as that of the front speakers.

To adjust the center speaker level,

press /–.

To adjust the left surround speaker level,

press SURR L +/–.

To adjust the right surround speaker level,

press SURR R +/–.

Ex.: When selecting “+8 (dB)” for “CENTER.”

Press TEST again to stop the test tone.

The currently selected source name appears on the display.

ΙΙ

SUBWFR

VOL

LPCM

TEST L

(Left front speaker)

TEST C

(Center speaker)

TEST R

(Right front speaker)

TEST LS

(Left surround speaker)

TEST RS

(Right surround speaker)

ΙΙ

SUBWFR

VOL

LPCM

On the front panel:

• No test tone is available when using the buttons on the front panel.

Before you start, remember...

There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step

again.

Select and play software you like.

If “AUTO SR (Auto Surround)” is set to “ON”

Playing a digital source automatically activates an appropriate
Surround mode. (See page 20.)

→

Go to step

Press SURROUND.

MULTI JOG now works for the Surround/DSP mode selection.

Turn MULTI JOG to select an appropriate
Surround mode.

• As you turn MULTI JOG, the indication changes as follows:

When playing back multi-channel digital software such as
Dolby Digital or DTS Digital Surround:

When playing back 2 channel digital software such as
Dolby Digital or DTS Digital Surround:

When playing back any software other than above:

Press ADJUST.

MULTI JOG now works for the sound adjustment.

Turn MULTI JOG until the setting item you want
to set appears on the display, then press SET.

• As you turn MULTI JOG, the indication changes as follows:

* Available only for “PLII MUSIC.”

STANDBY / ON

STANDBY

DIMMER

SETTING

ADJUST

SURROUND

DVD MULTI

DVD

DBS

VCR

FM / AM

SET / TUNER PRESET

SOURCE SELECTOR

MASTER VOLUME

PHONES

/ MULTI JOG

ΙΙ

SUBWFR

VOL

LPCM

BASS

TREBLE

PANORAMA*

B.BOOST

ATT

(Back to the beginning)

SUBWFR

SURR R

EFFECT

SURR L

BAL

CENTER

STEREO

(Surround/DSP off)

DOLBY D or DTS

SUBWFR LFE

VOL

DOLBY D

PLII MOVIE

PLII MUSIC

STEREO

(Surround/DSP off)

PLII MOVIE

PLII MUSIC

STEREO

(Surround/DSP off)

(Back to the beginning)

LIVE CLUB

PAVILION

HALL

DANCE CLUB

ALL CH ST.

25-31RX-ES1SL[UJ]f

03.5.19, 20:13

Summary of Contents for RX-ES1SL

























































































































































































































































































Search results

Summary of Contents for RX-ES1SL

Reviews:

Related manuals for RX-ES1SL

Brands by name

Popular brands

JVC RX-ES1SL, Instructions Manual

Search results

Summary of Contents for RX-ES1SL

Reviews:

Related manuals for RX-ES1SL

Brands by name

Popular brands