14
Basic adjustment of auto memory
This receiver memorizes sound settings for each source:
• when you turn off the power,
• when you change the source, and
• when you change the analog/digital input mode (see page 11).
When you change the source, the memorized settings for the
newly selected source are automatically recalled.
The following can be stored for each source:
• Analog/digital input mode (see page 11)
• Tone adjustment (see page 21)
• Subwoofer output level (see page 21)
• Bass boost (see page 22)
• Input attenuator mode (see page 22)
• Balance (see page 22)
• Subwoofer audio position (see page 22)
• Surround/DSP mode selection (see pages 25 – 30)
NOTES
• If the source is FM or AM, you can assign a different setting for
each band.
• You cannot assign and store different settings for digital input
mode and analog input mode.
Signal and speaker indicators on the display
The following signal indicators light up —:
L:
•
When digital input is selected:
Lights up when the left
channel signal comes in.
•
When analog input is selected:
Always lights up.
R:
•
When digital input is selected:
Lights up when the right
channel signal comes in.
•
When analog input is selected:
Always lights up.
C:
Lights up when the center channel signal comes in.
LS:
Lights up when the left surround channel signal comes in.
RS:
Lights up when the right surround channel signal comes in.
S:
Lights up when the monaural surround channel signal
comes in.
LFE: Lights up when the LFE channel signal comes in.
The speaker indicators light up as follows:
• The subwoofer indicator (
SUBWFR
) lights up when “SUBWFR” is
set to “USE” for Quick Setup (see page 16) or to “YES” for
Manual Setup (see page 17).
• The other speaker indicators light up only when the
corresponding speaker is set to “SML” or “LRG,” and also when
required for the current playback.
Signal indicators
Speaker indicators
ANALOG
PL
ΙΙ
SUBWFR LFE
AUTO SR
INPUT ATT
DSP HP
L
C
R
LS
S
RS
LPCM
DOLBY D
DTS
SUBWFR
L
C
R
LS
RS
LFE
L
C
R
LS
S
RS
Basic operations
ZOOM
ANGLE
REPEAT
DIMMER
SUBWFR
CENTER
L
R
SURR
BASS BOOST
A.POSITION
SMART S. SETUP
SLEEP
CANCEL
SURROUND
ANALOG/DIGITAL
TV RETURN
100
+
BASS
TREBLE
BASS
TREBLE
1
2
3
4
VFP
INPUT
TONE
TEST
EFFECT
DECODE
5
6
7
8
9
10
3D
0
PROGRESSIVE
Changing the display brightness
You can dim the display.
Press DIMMER repeatedly.
• Each time you press the button, the indication changes as follows:
STANDBY / ON
STANDBY
DIMMER
SETTING
ADJUST
SURROUND
DVD MULTI
DVD
DBS
VCR
DIMMER 1:
• Dims the display slightly.
• Dims the blue indication lighting source lamps.
DIMMER 2:
• Dims the display more than DIMMER 1.
• Dims the blue indication lighting source lamps
(same as DIMMER 1).
DIMMER 3:
Turns off the display and the blue indication
lighting source lamps.
DIMMER OFF:
Cancels the dim (normal display).
NOTES
• When setting speakers and basic items or adjusting sound, select
“DIMMER OFF” to confirm the setting you make on the display.
• When selecting DVD or DVD MULTI as a source using the remote
control, DIMMER will only function if you are using a JVC DVD
player. To dim the display and indication on the receiver, select a
source except DVD or DVD MULTI on the remote control, and then
press DIMMER.
11-14RX-ES1SL[UJ]f
03.5.19, 20:11
14
