23
Tuner operations
The buttons on the remote control are mainly used for tuner
operations.
To use buttons on the remote control, press
FM/AM before operation.
When operating this receiver using the remote control,
always set the mode selector to AUDIO/TV/VCR/DBS.
Tuning in to stations manually
From the remote control ONLY:
1
Press FM/AM to select the band.
The last received station of the selected band is tuned in.
• Each time you press the button, the band alternates between
FM and AM.
You can also select “FM” or “AM” by turning SOURCE SELECTOR
on the front panel.
2
Press repeatedly or hold TUNING
9
or
TUNING
(
until you find the frequency you
want.
If you select “FM” or “AM” using SOURCE SELECTOR on the
front panel, press FM/AM on the remote control before this
operation.
• Pressing (or holding) TUNING
9
increases the frequency.
• Pressing (or holding) TUNING
(
decreases the frequency.
NOTES
• When you hold and release TUNING
9
or TUNING
(
, the
frequency keeps changing until a station is tuned in.
• When a station of sufficient signal strength is tuned in, the TUNED
indicator lights up on the display.
• When an FM stereo program is received, the ST (Stereo) indicator
also lights up.
Using preset tuning
Once a station is assigned to a channel number, the station can be
quickly tuned. You can preset up to 30 FM and 15 AM stations.
To store the preset stations
Before you start, remember...
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step
2
again.
From the remote control ONLY:
1
Tune in to the station you want to preset (see
“Tuning in to stations manually” above).
• If you want to store the FM reception mode for this station,
select the FM reception mode you want. See “Selecting the FM
reception mode” on page 24.
2
Press MEMORY.
The channel number position starts flashing on the display for
about 5 seconds.
ANALOG
SUBWFR
ST
TUNED
AUTO MUTING
MH
Z
VOL
L
R
ANALOG
SUBWFR
ST
TUNED
AUTO MUTING
MH
Z
VOL
L
R
ANALOG
SUBWFR
ST
TUNED
AUTO MUTING
MH
Z
VOL
L
R
CONTINUED ON THE NEXT PAGE
OPEN/CLOSE
DVD
VCR
DBS
TV
DVD
VCR
DBS
TV
DVD MULTI
TV VOL
CHANNEL
TUNING
TUNING
DVD
AUDIO/TV
/VCR/DBS
FM MODE
MEMORY
TOP MENU
CHOICE
AUDIO
ZOOM
ANGLE
REPEAT
DIMMER
SUBWFR
CENTER
L
R
SURR
BASS BOOST
A.POSITION
SMART S. SETUP
SLEEP
CANCEL
SURROUND
ANALOG/DIGITAL
TV RETURN
100
+
BASS
TREBLE
SUBTITLE
RETURN
TITLE/GROUP
ON
SCREEN
MENU
VOLUME
FM/AM
TV/VIDEO
MUTING
AUDIO
HOME THEATER RECEIVER
BASS
TREBLE
PROGRESSIVE
1
2
3
4
VFP
INPUT
TONE
TEST
EFFECT
DECODE
5
6
7
8
9
10
3D
0
+10
ENTER
Setting the AM tuner interval spacing
Some countries space AM stations 9 kHz apart, and other countries
use 10 kHz spacing. 9 kHz interval spacing is the initial setting.
• Be sure the receiver is turned off, but is plugged into an AC outlet
when setting the AM tuner interval.
On the front panel ONLY:
To select the 10 kHz interval:
Hold down ADJUST and press STANDBY/ON
.
To change back to the 9 kHz interval:
Hold down SETTING and press STANDBY/ON
.
STANDBY / ON
STANDBY
DIMMER
SETTING
ADJUST
SURROUND
DVD MULTI
DVD
DBS
VCR
TV
FM / AM
SET / TUNER PRESET
SOURCE SELECTOR
MASTER VOLUME
PHONES
/ MULTI JOG
23-24RX-ES1SL[UJ]f
03.5.19, 20:13
23