JVC RX-7000RBK Service Manual Download Page 102 | Manualshive

Page: 102 / 126

background image

33

English

From the remote control:

1. Press DVD MULTI so that “DVD

MULTI” appears on the display.

Note:

When you select “DVD MULTI” as the source to play, the DSP
mode is canceled temporarily, and the SURROUND ON/OFF and
SURROUND MODE buttons do not work.

2. Select the analog discrete output mode on the

DVD player, and start playing a DVD.

• Refer to the manual supplied with the DVD player.

If you need to make any adjustment, go to the following
steps.

3. Press SOUND.

The 10 keys are activated for adjusting the sound.

4. Adjust the speaker output levels.

• To adjust the center speaker level, press CENTER –/+ (from

–10 dB to +10 dB).

• To adjust the left rear speaker level, press REAR•L –/+ (from

–10 dB to +10 dB).

• To adjust the right rear speaker level, press REAR•R –/+ (from

–10 dB to +10 dB).

Using the DVD MULTI Playback Mode

This receiver provides the DVD MULTI playback mode for reproducing the analog discrete output mode of the DVD
player. Before playing back a DVD, refer also to the manual supplied with the DVD player.

IMPORTANT:

When using the remote control, check to see if its
remote control mode selector is set to the correct
position:
To operate this receiver, set it to “AUDIO/TV/
VCR”.

Activating the DVD MULTI Playback Mode

You can adjust the DVD MULTI playback mode while playing back
a DVD using the analog discrete output mode on the DVD player.
Once you have made adjustments, the receiver memorizes the
adjustments until you change them. You also need to set the DVD
player to the analog discrete output mode.

Before you start, remember...
• There is a time limit in doing the following steps. If the setting is

canceled before you finish, start from step 1 again.

On the front panel:

1. Turn SOURCE SELECTOR until

“DVD MULTI” appears on the
display.

Note:

When you select “DVD MULTI” as the source to play, the DSP
mode is canceled temporarily, and the SURROUND ON/OFF and
DSP MODE buttons do not work.

2. Select the analog discrete output mode on the

DVD player, and start playing a DVD.

• Refer to the manual supplied with the DVD player.

If you need to make any adjustment, go to the following
steps.

3. Adjust the speaker output levels.

1) Press (BALANCE/) SURROUND

ADJUST repeatedly until one of the
indications appears on the display.
“CENTER LEVEL”:

To adjust the center speaker level.

“REAR L LEVEL”:

To adjust the left rear speaker level.

“REAR R LEVEL”:

To adjust the right rear speaker level.

2) Turn MULTI JOG to adjust the

selected speaker output level (from –10
dB to +10 dB).

3) Repeat 1) and 2) to adjust the other

speaker output levels.

AUDIO/
TV/VCR

CATV/DBS

SOURCE SELECTOR

DVD MUILTI

SOUND

CENTER

2

3

MENU

MENU

REAR•R

8

9

REAR•L

5

6

ENTER

MULTI JOG

BALANCE/

SURROUND

ADJUST

EN24_33.RX-7000R[E]/f

00.4.24, 3:02 PM

33

«
...
100
101
102
103
104
...
»

Summary of Contents for RX-7000RBK































































































































Reviews:

No comments

Related manuals for RX-7000RBK

Brand: Ocean Signal Pages: 2

Brand: Uconnect Pages: 123

Brand: u-blox Pages: 2

Brand: Yaesu Pages: 96

Brand: Harman Pages: 115

Brand: Xtrend Pages: 93

Brand: Shadow Pages: 6

Brand: Audiovox Pages: 24

Brand: Planet Audio Pages: 17

Brand: PEEKTON Pages: 86

Brand: MultiDyne Pages: 8

TechniBox VIACAM

Brand: TechniSat Pages: 46

Brand: SAF Pages: 91

Brand: NavAtlas Pages: 10

Brand: Icom Pages: 88

Brand: Icom Pages: 96

Brand: Icom Pages: 124

Brand: Costar Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands