JVC MC-8100U, Service Manual, Page: 21 / 100

17
ENGLISH
5. DOOR OPENING/CLOSING
Once the transport locks have been opened and the power has been turned on for the first time (the optional MC-AP30U label
printer may also have been incorporated), the door is locked by the internal safety locking system in addition to locking by the
door opening/closing key, so that the door cannot be opened by the key alone.
To open the door under these conditions, keep the power on, or turn it on if it had been off, and then perform the following
operations before using the door opening/closing key.
1.
In the normal display mode, press the MODE key.
(The menu display appears.)
2.
Press the SELECT key 4 times.
("5. DOOR OPEN MODE" appears.)
3.
Press the ENTER key.
(Select "5. DOOR OPEN MODE".)
4.
Press and hold the SELECT key for more than 5 sec-
onds.
(Wait until the display starts to blink.)
5.
Release the SELECT key when the execution display
appears.
* When installing/removing drive units, turn off the power
after the completion display (THE DOOR CAN BE
OPENED) appears.
• You cannot perform disc transport operations when the above door opening mode is being executed or the door is open.
Door Opening
6.
Inser t the door key in the cylinder and turn it
counterclockwise to release the lock and open the door.
Door Closing
1.
Close the door and lock it by turning the door key clock-
wise.
2.
Press the ENTER key when the display on the right
appears.
• The normal display returns after initialization.
Door opening/closing
key cylinder
The door is closed.
The door is open.
P U S H E N T E R K E Y
T O R E S U M E
D O O R O R P A N E L
I S O P E N E D
1 . N O R M A L D I S P L A Y
2 . E R R O R D I S P L A Y
5 . D O O R O P E N M O D E
6 . I D N o . S E T M O D E
P U S H S E L E C T K E Y
T O O P E N T H E D O O R
P U S H S E L E C T K E Y
T O O P E N T H E D O O R
E X E C U T I N G D O O R
O P E N P R O C E S S
T H E D O O R
C A N B E O P E N E D
Unlocked
Locked