EN
17
OPERATION
E
N
6). Channel tuning will commence. This operation
may take up to
several minutes. The display will
show the progress of the tuning and the number of
channels found.
7). If you want to skip the ATV tuning, press the MENU
button to interrupt the tuning half way. A pop-up screen
will be displayed, press the button to select YES to
confirm. You will then go straight to DTV tuning. You
may repeat the above step if you also want to skip the
DTV tuning.
8). After tuning is complete, the channels are arranged
in a preset order. If you wish to skip channels, modify
the preset order, rename or delete channels, select
P
rogramme Edit under the Channel menu.
2. 1 DTV Manual Tuning (DVB-T)
NOTE:
All the channels including ATV, DTV and Radio
can be tuned in one go, if the Tune Type is
DTV+ATV .
All the stored channels will disappear after
auto tuning .
ATV Manual Tuning
Programme Edit
Signal Information
< >
CHANNEL
Auto Tuning
DTV Manual Tuning
Software Update (USB)
CI Information
2). Press the buttons to select DTV Manual
Tuning and then press the OK button.
4). Press the MENU button to return back to the main
menu.
5). Press the EXIT button to exit the menu.
2. 2 DTV Manual Tuning (DVB-C)
1). Press the MENU button and then press the
buttons to select the CHANNEL menu.
3). The DTV Manual Tuning screen will pop up.
Press the buttons to select the desired VHF or
UHF channel and then press the OK button to
commence the search of that channel. When the
signal has been tuned, the picture and signal
strength will be displayed on the screen.
1). Press the MENU button and then press the
buttons to select the CHANNEL menu.
2). Press the buttons to select DVB-C Manual
Tuning and then press the OK button.
3). The DVB-C Manual Tuning screen will pop up.
Press the buttons to select Frequency, Symbol
(ks/s), QAM Type, enter the appropriate setting and
then press the OK button to commence the search
of that channel. When the signal has been tuned,
the picture and signal strength will be displayed on
the screen.
ATV Manual Tuning
Programme Edit
Signal Information
< >
CHANNEL
Auto Tuning
CADTV
Manual Tuning
Software Update (USB)
CI Information
Programme(s)
Programme(s)
Programme(s)
Programme(s)
(ATV)
ATV
Note: if you don't press any button, the DTV Manual
Tuning menu will disappear.
Note: If DVB-C Manual Tuning is not listed in the
Channel menu, you should first select Auto Tuning,
and then DVB-C.
4). Press the MENU button to return back to the
main menu.
5). Press the EXIT button to exit the menu.
Note: if you don't press any button, the
Manual Tuning menu will disappear.
DVB-C
Downloaded from www.vandenborre.be
