JVC LT-20DA6SK, Service Manual

Page: 48 / 96

- 11 -
Getting Started
Follow Step 1 to 7 to set up your TV:
Step 1: Checking the accessories supplied
• Remote control unit x 1
• AA/R6 battery x 2
• AC adapter x 1
• Power cord x 1
Step 2: Inserting batteries
• Remove the battery cover located on the back of the remote control by gently pulling upwards
from the indicated part.
• Insert two AA/R6 dry cell or equivalent type of batteries inside.
• Replace the battery cover.
NOTE: Remove the batteries from remote control when it is not to be used for a long
period.Otherwise it can be damaged due to any leakage of battery.
Old batteries must be disposed in a designated area. If performance of the remote control
reduces, replace the batteries with the correct type. Do not combine a used, old battery or a
new one or mixed battery types. Remove dead batteries immediately to prevent acid from
leaking into the battery compartment.
Step 3: Removing the terminal cover
There are connection terminals and a card socket behind the covers of the rear of the TV.
Remove the cover before connecting an antenna, VCR, DVD and other devices.
Remove the covers by removing the hooks. When replacing the covers, place the side or
bottom of the covers against the TV and insert the hooks.
• Leave the covers off if they do not fit properly. DO NOT force to replace the covers. Doing so
may cause damages of the connection cables and the covers.
• Leave these covers off when mounting the TV on a wall.
ENG-20710W-17MB16P-1895UK-(LT-20DA6SK)-50076128.p65 18.10.2005, 08:39 11