ENGLISH
25
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
TROUBLESHOOTING
Symptom
Remedy
ANDROID
“NO DEVICE” or “READING”
keeps flashing.
• Switch off the developer options on the Android device.
• Reconnect the Android device.
• If this does not solve the problem, the connected Android
device does not support [
AUTO MODE
]. (
23
)
Playback is intermittent or
sound skips.
Turn off the power saving mode on the Android device.
“CANNOT PLAY”
• Make sure Android device contains playable audio files.
• Reconnect the Android device.
• Restart the Android device.
Pandora
“ADD ERROR”
New station creation is unsuccessful.
“CHK DEVICE”
Check the Pandora application on your device.
“NO SKIPS”
The skip limit has been reached.
“NO STATIONS”
No stations are found.
“STATION LMT”
The number of registered stations has reached its limit.
Retry after deleting unnecessary stations from your
device.
“UPGRADE APP”
Make sure you have installed the latest version of the
Pandora application on your device.
“CONNECT ERR”
Communication is unstable.
“RATING ERR”
Registration of thumbs up/thumbs down has failed due
to insufficient network connectivity.
“THUMBS N/A”
Registration of thumbs up/thumbs down is not allowed.
“LICENSE ERR”
You try to access from a country which Pandora is not
deliverable.
Symptom
Remedy
Bluetooth®
No Bluetooth device is
detected.
• Search from the Bluetooth device again.
• Reset the unit.
( 3)
Pairing cannot be made.
• Make sure you have entered the same PIN code to both
the unit and Bluetooth device.
• Delete pairing information from both the unit and the
Bluetooth device, then perform pairing again.
( 10)
Echo or noise occurs.
• Adjust the microphone unit’s position.
( 10)
• Check the
[ECHO CANCEL]
setting.
( 12)
Phone sound quality
is poor.
• Reduce the distance between the unit and the Bluetooth
device.
• Move the car to a place where you can get a better signal
reception.
Sound is being
interrupted or skipped
during playback of a
Bluetooth audio player.
• Reduce the distance between the unit and the Bluetooth
audio player.
• Turn off, then turn on the unit and try to connect again.
• Other Bluetooth devices might be trying to connect to
the unit.
The connected Bluetooth
audio player cannot be
controlled.
• Check whether the connected Bluetooth audio player
supports Audio/Video Remote Control Profile (AVRCP).
(Refer to the instructions of your audio player.)
• Disconnect and connect the Bluetooth player again.
“PAIRING FULL”
The number of registered devices has reached its limit.
Retry after deleting an unnecessary device.
( 14,
DELETE PAIR)
JS_JVC_KW_R920BT_M_H_EN_1.indd 25
JS_JVC_KW_R920BT_M_H_EN_1.indd 25
30/10/2015 11:22:51 AM
30/10/2015 11:22:51 AM
