ENGLISH
29
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
STEERING
WHEEL
REMOTE
Wiring connection
(Not used)
Brown
Purple/black
Car fuse block
Ignition switch
Light blue/yellow
Blue/white: To amplifier
Blue: To power antenna
Make this connection if your vehicle
factory wiring harness does not have
“12 V ignition switch” wire.
Separate red wire
Signal cord (not supplied)
Remote wire
(not supplied)
To the steering wheel
remote control adapter
Fuse (10 A)
Antenna terminal
Factory wiring
harness (vehicle)
Vehicle dashboard
Black: Ground
Yellow: Battery 12 V
White/black
Gray/black
Green/black
*
2
Join the same color wires together.
Red: Ignition 12 V
Orange/white: Illumination
Blue/white: Remote (200 mA max.)
Recommended connection
IMPORTANT
We recommend installing the unit with a
commercially available custom wiring harness
specific for your car and leave this job to professionals
for your safety. Consult your car audio dealer.
JVC Amplifier
*
1
*
1
Firmly connect the ground
wire of the amplifier to
the car’s chassis to avoid
damaging the unit.
*
2
You can also connect a
subwoofer speaker directly
using this lead without an
external subwoofer amplifier.
For setting,
18
.
Custom wiring harness
(separately purchased)
Microphone input jack
( 10)
Rear/ Front/ Subwoofer output
For 3-way crossover: Tweeter/
Mid Range/ Woofer output
White: Front speaker/For 3-way crossover: Mid range speaker (left)
Gray: Front speaker/For 3-way crossover: Mid range speaker (right)
Purple: Rear speaker/For 3-way crossover: Tweeter (right)
Green: Rear speaker
*
2
/For 3-way crossover: Tweeter (left)
JS_JVC_KW_R920BT_M_H_EN_1.indd 29
JS_JVC_KW_R920BT_M_H_EN_1.indd 29
30/10/2015 11:22:51 AM
30/10/2015 11:22:51 AM