4
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
GETTING STARTED
Cancel the demonstration
When you turn on the power for the first time (or [
FACTORY RST
] is set to
[
YES
]), the display shows: “CANCEL DEMO” “PRESS” “VOLUME KNOB”
1
Press the volume knob.
[
YES
] is selected for the initial setup.
2
Press the volume knob again.
“DEMO
OFF”
appears.
Set the clock
1
Press and hold
.
2
Turn the volume knob to select [
CLOCK
], then press the knob.
3
Turn the volume knob to select [
CLOCK SET
], then press the knob.
4
Turn the volume knob to make the settings, then press the knob.
Day Hour Minute
5
Turn the volume knob to select [
24H/ 12H
], then press the knob.
6
Turn the volume knob to select [
12 HOUR
] or [
24 HOUR
], then press the
knob.
7
Press
to exit.
To return to the previous setting item, press
.
1
2
Set the basic settings
1
Press and hold
.
2
Turn the volume knob to select an item (see the following table),
then press the knob.
3
Repeat step
2
until the desired item is selected or activated.
4
Press
to exit.
To return to the previous setting item, press
.
Default:
XX
SETTINGS
BEEP
(Not applicable when 3-way crossover is selected.)
ON
: Activates the keypress tone. ;
OFF
: Deactivates.
SRC SELECT
AM
*
ON
: Enables AM in source selection. ;
OFF
: Disables.
SW1
*
ON
: Enables SW1 in source selection. ;
OFF
: Disables.
SW2
*
ON
: Enables SW2 in source selection. ;
OFF
: Disables.
PANDORA
*
ON
: Enables PANDORA in source selection. ;
OFF
: Disables.
AUX
*
ON
: Enables AUX in source selection. ;
OFF
: Disables.
F/W UPDATE
SYSTEM
F/W xxxx
YES
: Starts upgrading the firmware. ;
NO
: Cancels (upgrading is not
activated).
For details on how to update the firmware, see:
<http://www.jvc.net/cs/car/>.
FACTORY RST
YES
: Resets the settings to default (except the stored station). ;
NO
: Cancels.
* Not displayed when the corresponding source is selected.
3
JS_JVC_KW_R920BT_M_H_EN_1.indd 4
JS_JVC_KW_R920BT_M_H_EN_1.indd 4
30/10/2015 11:22:46 AM
30/10/2015 11:22:46 AM
