JVC KV-M705, Service Manual

Page: 10 / 47

1-10 (No.MA209)
SECTION 4
ADJUSTMENT
4.1 Service mode
4.1.1 Standard conditions
Power supply voltage:DC14.4V (11V to 16V)
4.1.2 Service mode setting procedure
[POWER] button [MENU] button
[MODE] button
[ ] button
[OPEN/CLOSE] button
1. Press the [POWER] button, and the display panel will come out and stand upright.
2. Press the [POWER], [ ] and [OPEN/CLOSE] buttons in this order, and keep them
pressed for 3 seconds or more.
3. The service mode menu is displayed in the monitor.
4. To exit the service mode, press the [POWER] button on the main unit for more than 3 seconds.
Service Mode Menu
INITIALIZE ALL
INFORMATION
LCD SETTING MODE
MONITOR MECHA RUNNING
MONITOR MECHA CHECK
READ MECHA ERROR
CLEAR MECHA ERROR
INITIALIZE
DW/UP : SEL MODE : ENT
>
The service mode menu is selected with the [ ] or [ ] button on the main unit,
and the service mode menu is entered with the [MODE] button on the main unit.