JVC KV-M705, Service Manual

Page: 9 / 47

(No.MA209)1-9
3.1.9 Removing the system control board
(See Fig.17)
• Prior to performing the following procedures, remove the front
assembly, top drive unit and rear bracket.
(1) From the top side of the bottom case assembly, remove the
five screws M attaching the system control board to the bot-
tom case assembly.
(2) Disconnect the wire from the connector CN351 on the sys-
tem control board.
(3) Take out the system control board from the bottom case
assembly.
Fig.17
3.1.10 Removing the front key board
(See Fig.18)
• Prior to performing the following procedure, remove the front
assembly.
(1) From the back side of the front assembly, remove the spac-
er from the front key board.
(2) Remove the eight screws N attaching the front key board
to the front assembly.
(3) Take out the front key board from the front assembly.
Reference:
After reattaching the front key board, cover it with the new
spacer.
Fig.18
M
System control board CN351
M M
N
Front key board Spacer