JVC KV-M705, Service Manual

Page: 5 / 47

(No.MA209)1-5
3.1.2 Removing the top drive unit
(See Figs.4 to 6)
• Prior to performing the following procedure, remove the front
assembly.
(1) From the both sides of the main body, remove the four
screws B attaching the top drive unit to the main body. (See
Fig.4.)
(2) From the back side of the main body, remove the three
screws C attaching the top drive unit to the main body. (See
Fig.5.)
(3) From the top side of the main body, lift the top drive unit
from the bottom case assembly.
(4) Lift up the lock lever of the connectors ( CN391 and CN392 )
on the system control board and disconnect the flexible
wires from it. (See Fig.6.)
(5) Take out the top drive unit from the bottom case assembly.
Fig.4
Fig.5
Fig.6
B
B
Top case assembly
Top drive unit
C C
Top drive unit
System control board Bottom case assembly
Flexible wires
CN391 CN392
Top drive unit