Removing the bottom cover (see Fig. 5~7)
1.
2.
3.
4.
5.
Remove the front panel assembly.
Remove the front chasssis.
Turn the body up side down, then remove the two
screws D attaching the bottom cove.
Release two joint b fixing the bottom cover on the
left and right side of the body.
Release the bottom cover from the body.
1.
2.
3.
4.
5.
6.
7.
Removing the front panel assembly.
Removing the front panel chassis.
Removing the bottom cover.
Removing the one screw E attaching the top
chassis.
Removing the two screws F attaching the side
bracket.
Removing the three screws G attaching the main
board.
Removing the three screws H attaching the top
chassis.
Removing the main board (see Fig. 6~9)
Fig.5
D
E
F
F
b
b
Fig.6
Fig.7
Fig.8
G
G
H
H
Fig.9
Summary of Contents for KD-MX2900R
Page 64: ...Printed circuit boards Main board old type Forward side Main board old type Reverse side ...
Page 65: ...Main board new type Forward side Main board new type Reverse side ...
Page 66: ...MD CD Servo board Forward side Switch board Forward side ...
Page 67: ...MD CD Servo board Reverse side Switch board Reverse side ...