4
When connecting the external components, refer also to the manuals supplied for the components and adapter.
CAUTION:
Before connecting the external components, make sure that the unit is turned off.
You can connect the following JVC components to the CD changer jack.
JVC component
Model name
CD changer (CD-CH)
CH-X1500, etc.
You can also connect the following components through the various JVC adapters.
• Connection cords may need to be purchased separately.
Component
Adapter
Model name
iPod
Interface adapter for iPod
KS-PD100
Portable audio player with line input jacks
Line input adapter
KS-U57
Portable audio player with 3.5 mm stereo mini jack
AUX input adapter
KS-U58
D
E
Connecting the external amplifier
You can connect an amplifier to upgrade your car stereo system.
• Connect the remote lead (blue with white stripe) to the remote lead of the other equipment so that it can be controlled through this unit.
• Disconnect the speakers from this unit, connect them to the amplifier. Leave the speaker leads of this unit unused.
Rear speakers
JVC Amplifier
Remote lead
Y-connector
*
3
Remote lead (blue with white stripe)
To the remote lead of other equipment or automatic antenna if any
Front speakers
Required connections for DVD and AV IN playback
Audio/video control amplifier or the decoder
compatible with the multichannel digital sources
KV-MR9010
9-INCH WIDESCREEN MONITOR
*
3
Digital optical cable
*
3
Video cord
*
3
*
3
Not supplied for this unit.
*
4
Signal cord (not supplied for this unit).
*
5
Firmly attach the ground wire to the metallic body or to the chassis of the car—to the place uncoated with paint (if coated with paint, remove the paint before attaching the wire). Failure to do so may cause damage to the unit.
Connecting the external components
F
iPod is a trademark of Apple Inc., registered in the U.S. and other countries.
To disconnect the connector
Hold the connector tightly (
1
), then pull it out (
2
).
CD changer jack
CD-CH / KS-PD100 /
KS-U57 / KS-U58
When connecting an external component
You can also connect an external component to the LINE IN plugs on the rear of the unit using a signal cord (not supplied).
External component
Instal3-4_DV6404_002A_f.indd 4
Instal3-4_DV6404_002A_f.indd 4
12/14/07 4:52:50 PM
12/14/07 4:52:50 PM