16
Operations using the
on-screen bar
(DVD/DVD-VR/DivX/MPEG Video/VCD)
These operations are possible on the monitor using the
remote controller.
1
Show the on-screen bar (see page 17).
2
Select an item.
3
Make a selection.
If pop-up menu appears...
• To cancel pop-up menu, press RETURN.
• For entering time/numbers, see the following.
Entering time/numbers
Press
%
/
fi
to change the number, then press
@
/
#
to
move to the next entry.
• Each time you press
%
/
fi
, the number increases/
decreases by one value.
• After entering the numbers, press ENT (enter).
• It is not required to enter the zero and tailing zeros
(the last two digits in the example below).
Ex.: Time search
DVD:
_:_ _:_ _ (Ex.: 1:02:00)
Press
%
once, then
#
twice to go to the third entry,
%
twice, then press ENT (enter).
To remove the on-screen bar
(twice)
Using menu driven features... (DVD-Video/
DVD-VR)
1
Press TOP M/MENU to enter the menu screen.
2
Press
%
/
fi
/
@
/
#
to select an item you want to
start play.
3
Press ENT (enter) to confirm.
Canceling the PBC playback... (VCD)
1
During stop, press DIRECT while holding SHIFT.
2
Hold SHIFT, then press the number buttons (0 – 9)
to enter the desired number.
3
Press ENT (enter) to confirm.
• To resume PBC, press TOP M/MENU.
EN12-17_DV6406_005A_f.indd 16
EN12-17_DV6406_005A_f.indd 16
12/14/07 2:16:34 PM
12/14/07 2:16:34 PM