1-14 (No.49879)
3.2.6
Removing the front unit
(See Fig.10 ~ 12)
• Prior to performing the following procedure, remove the top
cover and the mechanism section.
(1) Disconnect the flexible wire from connector
CN202
on the
front end board at the bottom of the body.
(2) Remove the screw
D
attaching the front unit on top of the
body.
(3) Move the front unit toward the front to release joint
h
, and
release two joints
i
and
j
on the right side of the chassis
base. Then remove the front unit upward.
(4) Remove the two screws
E
attaching the switch board.
Reference:
You can remove the switch board only without removing the
front unit.
Caution:
When reassembling, attach the flexible wire extending from
the switch board using a double tape.
Fig.10
Fig.11
Fig.12
D
Front unit
h
h
Front unit
Switch board
j
D
E
i
Double tape
Front-end board
Flexible wire
CN202
Summary of Contents for KD-DV5000
Page 29: ... No 49879 1 29 ...
