1-12 (No.49879)
3.2.2
Removing the top cover
(See Fig.2)
(1) Remove the two screws
B
attaching the top cover on the
back of the body. Remove the top cover upward.
Reference:
When reassembling, set part
b
of the top cover under the
bending part
c
of the chassis frame.
3.2.3
Removing the mechanism section
(See Fig.2 ~ 4)
• Prior to performing the following procedure, remove the top
cover.
(1) Remove the two screws
C
attaching the right and left stop-
pers on the front side.
(2) Remove the two floating springs on the bottom of the body.
(3) Move the mechanism section upward and remove from the
chassis frame.
The three damper springs come off from the dampers.
Caution:
When reassembling, reattach the damper spring to the damp-
er respectively and insert the three shafts on the bottom of the
mechanism to the dampers.
Caution:
Before inserting the shaft to the dampers, apply IPA to the hole
of damper.
Fig.2
Fig.3
Fig.4
B
Top cover
Stopper
Stopper
C
C
㨎
c
Floating spring
Mechanism section
Damper
(Purple)
Damper
(Black)
Damper
(Black)
Chassis frame
Damper SP.(F)
(Silver)
Damper SP.(F)
(Silver)
Damper SP.(R)
(Red)
Summary of Contents for KD-DV5000
Page 29: ... No 49879 1 29 ...
