1-14 (No.MA446<Rev.001>)
3.2.10 Removing the Roller assembly (See Fig.19)
(1) Remove the Slit washer.
(2) Remove the R middle gear.
(3) Remove the R connect gear.
(4) Snap off the part
a
of the Roller assembly.
(5) Lift up the part
b
of the Roller assembly, and then release
part
c
(When release part
c
, R collar R is easy to come off,
does not lose it).
CAUTION:
When reattach the Roller assembly, Middle gear should keep
direction and Slit washer should be change new part.
Fig.19
3.2.11 Removing the Roller (See Fig.20)
(1) Remove the Slit washer.
(2) Pull out the Roller shaft.
CAUTION:
When reattach the Roller shaft, Slit washer should be change
new part.
Fig.20
Direction
Slit washer
R connect gear
R collar R
R middle gear
part
b
part
a
part
c
keep direction
slit
small side
keep direction
slit
