1-18 (No.MA446<Rev.001>)
4.6.3 Service mode 3
SERVICE MODE 3
SERVICE MODE 3
INITIALIZE ALL
RUNNING MODE
Screen indication
SERVICE MODE
SERVICE MODE
VERSION
AREA/REGION
TEMPERATURE
MEMORY CHECK
DVD NTSC/PAL
DVD CHECK MODE
* Exchanging it operate
a menu of a service
mode with the [ ]
button and [ ] button.
* Operate choice of a
menu with a [PLAY/PAUSE]
button.
* Return to previous menu
with a [BAND] button.
SERVICE MODE
ERROR READ
ERROR CLEAR
BT VERSION
Set to service mode 3: [SOURCE] [EJECT] [MENU] [PLAY/PAUSE] [DISP]
Exchanging it operate a menu of a service mode with the [ ] button
and [ ] button. Operate choice of a menu with a [PLAY/PAUSE] button.
INITIALIZE ALL
NOW
INITIALIZE ALL
RUNNING MODE
* See "Running mode" for details.
INITIALIZE ALL
OK **
VERSION
MAIN V**** [**]
DISC ****
CH ******
PN V*** V *** [**] V***
SW BT MODULE V***
Micon version indication
Main micon version and ROM correction version
DVD module version
CH version
Panel micon version and ROM correction version
Software version of BT Module
DVD NTSC/PAL
NTSC
PAL
DVD picture change
DVD module output picture setting (NTSC)
DVD module output picture setting (PAL)
ERROR READ
DVD ERROR READ
CH ERROR READ
MECHA ERROR READ
READ ALL
ERROR CLEAR
DVD ERROR CLEAR
CH ERROR CLEAR
MECHA ERROR CLEAR
Clear of each error history
A screen returns to following
indication after clear completion.
BT VERSION
SW BT CORE ***
HW BT MODULE ***
SW BT MODULE ***
ADR-************
Bluetooth version indication
Software version of BT core
Hardware version of BT Module
Software version of BT Module
BT Address
INITIALIZE ALL (Each EEPROM is initialized by a
factory shipment state.)
* Main micon EEPROM initialization
(user entry domain, error history,speaker setting,
subarea of J-version, data to pre-set )
* Panel micon EEPROM initialization
(picture adjustment data)
* DVD unit EEPROM initialization (except a permanent domain)
* Bluetooth module EEPROM initialization
* After clear completion, a screen returns to normal indication
after OK indication was displayed for three seconds.
AREA/REGION
SYS-AREA : *
DISC-AREA : **
REGION : *
PANEL AREA : *
TEMPERATURE Temperature data reading
* Temperature data by the temperature sensor in the main micon
and DVD-PCB is read every 5 seconds and displayed in hex numbers.
Area and region indication
Main micon area
DVD area
Region
PANEL area
DVD CHECK MODE
* See "DVD CHECK MODE" for details.
DVD ERROR READ
Reading of a DVD unit error history
MEMORY CHECK ( It is displayed only at the time of the disc insertion )
Memory residual quantity indication mode
* Data residual quantity of a disc is displayed by LCD.
* About the playback control-related key ([FSKIP], [BSKIP], [UP], [DOWN], [VOL]),
only movement is effective.
Indication does not change as memory residual quantity indication.
* About cancellation of this mode, press the [STANDBY/ON ATTENUATOR] button.
CH ERROR READ
Reading of a CD changer error history
MECHA ERROR READ
Reading of a door mechanism error history
READ ALL *Only the engineer use
Reading of a main micon EEPROM (All contents)
