JVC HR-DVS2EU, Instructions Manual

Page: 58 / 88

58
EN
EDITING (cont.)
L-2 SELECT Setting
Set "L-2 SELECT" to the appropriate mode depending on the type of unit connected to the recorder's AV2 (L-2) IN/DECODER
connector.
1
Press MENU to access the Main Menu screen.
2
Press
%fi
to move the highlight bar (pointer) to "OUTPUT/INPUT SET", then press OK or
#
.
3
Press
%fi
to move the highlight bar (pointer) to "L-2 SELECT".
4
Press OK or
#
to select "A/V", "DECODER" or "SAT".
a– A/V : To use this recorder as the recording deck with the player connected to the
AV2 (L-2) IN/DECODER connector, or to use the satellite receiver con-
nected to the AV2 (L-2) IN/DECODER connector.
b– DECODER : To use a decoder connected to the AV2 (L-2) IN/DECODER connector.
c– SAT : To view a satellite programme with the TV set while the recorder is turned
off. (
墌
pg. 60)
5
Press MENU to return to normal screen.
●
If you have a satellite receiver or a decoder connected to the AV2 (L-2) IN/DECODER connector, be sure to set "L-2 SELECT"
back to appropriate mode after editing.
●
If you are not connecting a satellite receiver or a decoder to the AV2 (L-2) IN/DECODER connector, leave "L-2 SELECT" set to
"A/V".
●
The default setting is "A/V"; if the recorder's memory backup has expired due to a power cut or because the AC was removed
from the recorder, "A/V" will be automatically selected when the power is restored to the recorder. If you are using a satellite
receiver or a decoder, be sure to set "L-2 SELECT" back to appropriate mode.
●
When "L-2 SELECT" is set to "SAT", "SAT" appears on TV screen or front display panel instead of "L-2" or "L2".
●
If "L-1 OUTPUT" is set to "S-VIDEO", it is impossible to set "L-2 SELECT" to "DECODER".
L-1 OUTPUT/INPUT Setting
The AV1 (L-1) IN/OUT connector accepts and delivers either a composite signal (regular video signal) or a Y/C signal (a signal in
which the luminance and chrominance signals are separated). Set "L-1 OUTPUT" and "L-1 INPUT" to the appropriate mode
depending on the type of appliance connected to the recorder's AV1 (L-1) IN/OUT connector.
1
Press MENU to access the Main Menu screen.
2
Press
%fi
to move the highlight bar (pointer) to "OUTPUT/INPUT SET", then press OK or
#
.
3
Press
%fi
to move the highlight bar (pointer) to "L-1 OUTPUT" or "L-1 INPUT".
4
For "L-1 OUTPUT"
Press OK or
#
to select "VIDEO" or "S-VIDEO".
a– VIDEO : If a connected appliance's input is compatible only with regular video
signals, set to "VIDEO".
b– S-VIDEO : If a connected appliance's input is compatible with Y/C signals, set to
"S-VIDEO". You can obtain higher-quality S-VHS pictures. (For connection,
be sure to use a 21-pin SCART cable that is compatible with the Y/C
signal.)
For "L-1 INPUT"
Press OK or
#
to select "VIDEO" or "S-VIDEO".
a– VIDEO : If a connected appliance's output is compatible only with regular video
signals, set to "VIDEO".
b– S-VIDEO : If a connected appliance's output is compatible with Y/C signals, set to
"S-VIDEO". You can obtain higher-quality S-VHS pictures. (For connection,
be sure to use a 21-pin SCART cable that is compatible with the Y/C
signal.)
5
Press MENU to return to normal screen.
●
If "L-1 OUTPUT" is set to "S-VIDEO", it is impossible to set "L-1 INPUT" to "S-VIDEO".
●
If "L-2 SELECT" is set to "DECODER", it is impossible to set "L-1 INPUT" to "S-VIDEO".
OUTPUT/INPUT SET
L-1 OUTPUT VIDEO
L-1 INPUT VIDEO
L-2 SELECT A/V
VHS
F-1 INPUT VIDEO
[
5∞
]
=
[MENU] : EXIT
OUTPUT/INPUT SET
L-1 OUTPUT VIDEO
L-1 INPUT VIDEO
L-2 SELECT A/V
VHS
F-1 INPUT VIDEO
[
5∞
]
=
[MENU] : EXIT