EN
55
NOTES:
●
Once the Audio Dubbing starts, you can not use the other
deck.
●
When monitoring the sound during Audio Dubbing, the
normal soundtrack is automatically selected. If you wish to
hear the mixed sound (Hi-Fi + Normal soundtracks), press
AUDIO
on the remote control to select "HIFI NORM" (VHS
deck only
墌
pg. 24).
●
Audio dubbing stops automatically when the counter reaches
"0:00:00", and the recorder enters the Play mode (VHS deck
only). Check the counter reading before dubbing.
●
Audio dubbing is also possible using the rear panel AV1 (L-1)
IN/OUT or AV2 (L-2) IN/DECODER connector. When using
these connectors, make sure to select the correct input mode
in step
3
.
●
Audio dubbing cannot be performed on a VHS/S-VHS
cassette that has had its record safety tab removed, or on a
Mini DV cassette that has had its erase protection switch set
to "SAVE".
●
When playing back an audio-dubbed tape on the VHS deck,
press
AUDIO
on the remote control to select the soundtrack
you wish to hear (
墌
pg. 24). When playing back an audio-
dubbed Mini DV tape on the DV deck, set "12BIT MODE" to
"SOUND2" (
墌
pg. 25).
●
Audio dubbing is not possible using the DV IN/OUT
connector.
1
2
3
4
5
6
7
8
9
1
2
1
2
3
0
3
4
4
PLAY
PAUSE
STOP
AUDIO
ENGAGE AUDIO DUBBING
5
Press
A. DUB
.
●
Your recorder enters the Audio Dubbing Pause mode.
(" " blinks, " " and " " light up on the front display
panel.)
●
To perform audio dubbing with audio mixing, press
AUDIO
on the remote control to select "HIFI L
R"
or "L
R" at this point. When using the DV deck
as the recording deck, also make sure that "12BIT
MODE" is set to "SOUND1" (
墌
pg. 25).
* Audio dubbing with audio mixing is not possible if
you're using a monaural audio component, or if
you don't have an audio mixer.
START DUBBING
6
Engage the audio component's Play mode, then press
PLAY
to start the tape in your recorder. Audio dubbing
begins at this point.
●
When monitoring the audio-dubbed sound on the DV
deck, set "12BIT MODE" to "SOUND2". (
墌
pg. 25)
●
" " blinks and " " is displayed on the front display
panel.
●
To stop dubbing temporarily, press
PAUSE
. Press
PLAY
to resume dubbing.
END AUDIO DUBBING
7
Press
STOP
to stop the tape in your recorder, and
engage the audio component's Stop mode.
Summary of Contents for HR-DVS2EU
Page 87: ...MEMO ...