JVC HM-HDS4EK Page 39 Instructions Manual Download

Page: 39 / 104

Masterpage:Right-NoTitle0

Filename [HM-HDS4EK_04Basic.fm]

Page 39

April 22, 2003 10:12 pm

Playback Features

Still Picture/Frame-By-Frame
Playback

Pause during playback.

Push the

JOG

dial.

Press

Activate frame-by-frame playback.

Turn the

JOG

dial to the right for forward frame-by-frame

playback, or to the left for reverse frame-by-frame
playback.

Press

repeatedly to advance one frame at a time.

Press

repeatedly to reverse one frame at a time.

Slow Motion

Pause during playback.

Push the

JOG

dial.

Press

Activate slow motion playback.

Press and hold

for over 2 seconds.

●

The playback speed changes for each direction by pressing

repeatedly.

●

To resume normal playback, press

Variable Speed Search

During playback, turn the

JOG

dial to the right for

forward variable-speed search, or to the left for reverse
variable-speed search.

During playback, press

for forward variable-speed

search, or

for reverse variable-speed search.

●

The playback speed changes for each direction by pressing

repeatedly. Refer to the illustration below.

●

To resume normal playback, press

ATTENTION

●

Picture may not appear during variable speed search with
an LP-recorded tape.

●

In the variable speed search, still, slow motion or
frame-by-frame playback mode, the picture will be
distorted, and there will be a loss of colour.

●

When normal playback resumes from search, still, slow
motion or frame-by-frame playback, the picture may jitter
vertically momentarily depending on the type of TV being
used.

Clean the video heads using a dry cleaning
cassette — ECL-3F — when:

●

Rough, poor picture appears while a tape is played back.

●

The picture is unclear or no picture appears.

●

“USE CLEANING CASSETTE” appears on the screen (only
with “O.S.D.” set to “ON” (

墌

pg. 82)).

HM-HDS4EK.book Page 39 Tuesday, April 22, 2003 10:14 PM

Summary of Contents for HM-HDS4EK









































































































Search results

Summary of Contents for HM-HDS4EK

Reviews:

Related manuals for HM-HDS4EK

Brands by name

Popular brands

JVC HM-HDS4EK, Instructions Manual

Search results

Summary of Contents for HM-HDS4EK

Reviews:

Related manuals for HM-HDS4EK

Brands by name

Popular brands