Filename [HM-HDS4EK_06Edit.fm]
Masterpage:Left
70
Page 70
April 22, 2003 10:12 pm
EDITING (cont.)
Edit To Or From
Another Video
Recorder
You can use your recorder as the source player or as the
recording deck.
A
Make connections.
Connect the player’s 21-pin SCART connector to the
recorder’s 21-pin SCART connector as illustrated on
page 71.
A
When using your recorder as the source player ...
... connect its L-1 IN/OUT connector to the recording
deck.
B
When using your recorder as the recording deck ...
... connect its L-1 IN/OUT or L-2 IN/DECODER
connector to the source player.
C
If another recorder is compatible with the Y/C signal ...
... connect your recorder’s L-1 IN/OUT connector to
another recorder.
With
C
connection ...
●
When using your recorder as the recording deck, set “L-1
INPUT” to “S-VIDEO” and “L-2 SELECT” to “A/V” (
墌
pg. 68,
69).
●
When using your recorder as the source player, set “L-1
OUTPUT” to “S-VIDEO” (
墌
pg. 68).
B
Select the recording deck.
Slide
TV/CABLE/SAT
to the right, then press
HDD
or
S-
VHS
.
C
Set the input mode of recording deck.
With this video recorder, press
AUX
(
number key
“
0
”)
and/or
VCR PR
to select “L-1” for the L-1 IN/OUT
connector, or “L-2” for the L-2 IN/DECODER connector,
depending on the connector being used.
●
When using another recorder as the recording deck, refer to its
instruction manual.
●
When using the L-2 IN/DECODER connector, set “L-2
SELECT” to “A/V” (
墌
pg. 69).
D
Set the edit mode.
See “PICTURE CONTROL” on page 81.
E
Start the source player.
Engage the Play mode of the source player.
F
Start the recording deck.
Engage the Record mode of the recording deck.
Advantages of S-VHS video recorders
You can edit from VHS to S-VHS, S-VHS to VHS, or, from
S-VHS to S-VHS.
●
From VHS to S-VHS: Record VHS playback signals in the
S-VHS mode. Although the picture quality is inherently
limited by that of the original, the edited tape has better
picture quality than those made by VHS-to-VHS editing.
●
From S-VHS to VHS: Because the picture quality of the
source material is very high, the edited tape has better
picture quality than those made by VHS-to-VHS editing.
●
From S-VHS to S-VHS: All signals will be transferred with
minimum degradation.
?
HM-HDS4EK.book Page 70 Tuesday, April 22, 2003 10:14 PM
