JVC HM-HDS4EK Page 22 Instructions Manual Download

Page: 22 / 104

Filename [HM-HDS4EK_04Basic.fm]

Masterpage:Left

Page 22

April 22, 2003 10:12 pm

RECORDING/PLAYBACK ON HDD DECK

Basic Recording

Turn on the recorder.

Press

●

The button corresponding to the previously selected deck
lights on the recorder.

Select the HDD deck.

On the recorder

Press

S-VHS/HDD

repeatedly until HDD indicator lights.

On the remote control

Press

HDD

●

The HDD indicator lights on the recorder.

Choose a programme.

Press

VCR PR +/–

or the

number keys

. Or turn the

JOG

dial clockwise or counterclockwise to select the channel
you wish to record while a TV channel is displayed on
the front display panel.

●

To change the indication on the front display panel, press the

JOG

dial while the HDD deck is stopped. Each time you press

the

JOG

dial, TV channel and clock display alternate.

●

When you switch channels on the HDD deck, the picture
appears a few seconds behind. It is not a malfunction.

Set the recording speed.

Press

MODE

●

For details on the recording speed, see page 23.

Start recording.

Press and hold

and press

on the remote control, or

press

on the recorder.

●

The HDD REC mode indicator lights on the recorder.

Stop recording.

Press

●

The HDD REC mode indicator turns off.

●

There may be a few seconds’ delay in resuming normal screen.
It is not a malfunction.

NOTES:

●

It is not possible to record a TV programme on both the HDD
deck and the VHS deck simultaneously. In addition, it is not
possible to record simultaneously from the same external
input.

●

It is not possible to pause recording on the HDD deck while
recording from the channels other than

“

L-1

”

“

L-2

”

“

F-1

”

“

D-

”

, or

“

DUB

”

. (

墌

pg. 66, 67)

●

While recording a programme, you can play back the
previously recorded part by “Live Memory Playback”
(

墌

pg. 28).

●

Turn on the TV and select the AV mode.

●

Slide

TV/CABLE/SAT

switch to the right.

●

If the recorder is turned on with HDD deck selected,
there may be about 30 seconds’ delay in starting to
show pictures on the screen.

HM-HDS4EK.book Page 22 Tuesday, April 22, 2003 10:14 PM

Summary of Contents for HM-HDS4EK









































































































Search results

Summary of Contents for HM-HDS4EK

Reviews:

Related manuals for HM-HDS4EK

Brands by name

Popular brands

JVC HM-HDS4EK, Instructions Manual

Search results

Summary of Contents for HM-HDS4EK

Reviews:

Related manuals for HM-HDS4EK

Brands by name

Popular brands