JVC HM-HDS4EK Page 30 Instructions Manual Download

Page: 30 / 104

Filename [HM-HDS4EK_04Basic.fm]

Masterpage:Left

Page 30

April 22, 2003 10:12 pm

RECORDING/PLAYBACK ON HDD DECK (cont.)

Playback Features

Still Picture/Frame-By-Frame
Playback

Pause during playback.

Push the

JOG

dial.

Press

Activate frame-by-frame playback.

Turn the

JOG

dial to the right for forward frame-by-frame

playback, or to the left for reverse frame-by-frame
playback.

Press

repeatedly to advance one frame at a time.

Press

repeatedly to reverse one frame at a time.

●

To resume normal playback, press

Slow Motion

Pause during playback.

Push the

JOG

dial.

Press

Activate slow motion playback.

Press and hold

for over 2 seconds.

●

The playback speed changes for each direction by pressing

repeatedly.

●

To resume normal playback, press

Variable Speed Search

During playback, turn the

JOG

dial to the right for

forward variable-speed search, or to the left for reverse
variable-speed search.

During playback (or Live Memory Playback), press

for forward variable-speed search, or

for reverse

variable-speed search.

●

The playback speed changes for each direction by pressing

repeatedly. Refer to the illustration below.

●

To resume normal playback, press

NOTE:

1.5 times-speed playback with sound is not possible when
recording speed set to DV.

●

Turn on the TV and select the AV mode.

●

Slide

TV/CABLE/SAT

switch to the right.

●

If the recorder is turned on with HDD deck selected,
there may be about 30 seconds’ delay in starting to
show pictures on the screen.

HM-HDS4EK.book Page 30 Tuesday, April 22, 2003 10:14 PM

Summary of Contents for HM-HDS4EK









































































































Search results

Summary of Contents for HM-HDS4EK

Reviews:

Related manuals for HM-HDS4EK

Brands by name

Popular brands

JVC HM-HDS4EK, Instructions Manual

Search results

Summary of Contents for HM-HDS4EK

Reviews:

Related manuals for HM-HDS4EK

Brands by name

Popular brands