1-26 (No.YF100)
2.6
Pict Bridge
GZ-MC100, GZ-MC200 and GZ-MC500 support PictBridge.
PictBridge is a standard that allows direct printing by connecting digital cameras and camcorders to printers.Conventionally, data
needed to be stored in a PC before printing pictures and still images taken by digital cameras or camcorders. The actual printing was
done by the instruction from the PC.Now direct printing is available by connecting PictBridge supporting devices via USB cables.
Digital cameras or camcorders of other makes have variety of functions that can be controlled on the camera or camcorder side: spec-
ify print settings such as sheet sizes, print specified images, Index Printing of a list of all images in scaled-down size, print multiple
copies of the same images, and print with date stamps. However GZ-MC100/200/500 can only use the basic required functions and
some partial functions of PictBridge. Please refer to the table below for the supporting functions.
Connect EVERIO and the printer in the following procedure.
(1) Set EVERIO in Playback Mode.
(2) Set the MODE lamp to Still image mode, and then select "DIRECT PRINT" in the MENU.
(3) Connect to the printer, and then turn the printer power on.
If EVERIO was connected to the printer before being set to "DIRECT PRINT", it is recognized as mass storage (an external drive) by
the printer.The printer does not operate as it does not recognize EVERIO as a PictBridge device.If the printer power was on before
the printer is connected to EVERIO, contact noise may be generated.The printer may not operate properly as it does not recognize
the connection of the PictBridge device because of the contact noise.
Function
Overview
Support
Single Image print
Single print of a single image
䃁
Multiple Image print
Print multiple images
DPOF AUTOPRINT
Auto print following DPOF files
䂾
All image index
Index print of thumbnail-size DPOF images
Print all the images within the medium
㶎
DSC images in the image format, of which the printer does not
support, are not necessarily output.
Area specified print
Print trimmed images
Copy print
Multiple print in specified numbers
䂾
Date stamped print
Print with a shooting date stamp
䂾
Specified sheet size print
Print with sheet specification
Fixed size print
Print in specified print size
N-up layout print
Print multiple copies of the same image on a single sheet
Print with file names
Print images with file names
Borderless print
Print pictures without white borders
DPS connection setup
Initial sequence of the camera and the printer connection
䃁
Printer error notice
Display printer errors on the camera monitor
䃁
Error detail notice
Display the printer error detail on the camera monitor
Printing status notice
Display the printer’s printing status on the camera monitor
䂾
Disconnection permit notice
Display the message to disconnect the cable safely
Printing complete notice
Display the completion of printing on the camera monitor
Print quality specification
Print in specified print quality
Sheet variety specification
Print in specified sheet variety
Print cancel from DSC
While printing, request the printer to cancel printing from the camera
䂾
USB cable cutoff recovery
Re-start printing after DPOF printing was halt due to the cable cutoff
Printer sheet output recovery
Automatically re-start feeding sheets after paper-out
䃁
DSC error recovery
Re-start printing after a disruption due to the printer
䂾
Printer status information
Printer settings
Print job control
Standard print settings
All image print
Extended print settings
䃁
: Basic required functions of PictBridge
䂾
: Workable functions with EVERIO
㶎
Items that are not supported by Extended print settings or Printer settings are printed in default settings of the printer.
Although GZ-MC100/200 are supported by above items, actual available functions depend on the printer function, and the functions
that are supported by both the printer and the camera are operable.
Summary of Contents for GZMC500US - Everio Camcorder - 1.33 MP
Page 43: ... No YF100 1 43 ...