JVC GY-HM790U, Instructions Manual

Page: 98 / 144

94
Menu Display and Detailed Settings
* Default values are indicated in bold characters.
Others Menu (continued)
Item Setting Values Function
Tally System Studio
Ext
Int
For setting the display conditions of the camera recorder’s tally lamps (front/back).
Studio : Displays according to the TALLY IN/PREVIEW IN signals from an external device,
such as a Remote Control Unit.
Ext : Displays mainly the status of external devices.
Int : Displays mainly the status of the camera recorder.
Front Tally
On
Blink
Off
For specifying the illumination settings of the camera recorder’s front tally lamp during
recording.
On
: Lights up only during recording.
Blink : Blinks after the [REC] trigger button is pressed until recording starts, and lights up
during recording.
Off : Turns off the tally lamp.
Back Tally
On
Blink
Off
For specifying the illumination settings of the camera recorder’s back tally lamp during
recording.
On
: Lights up only during recording.
Blink : Blinks after the [REC] trigger button is pressed until recording starts, and lights up
during recording.
Off : Turns off the tally lamp.
1 3 94 Rec Trigger Ext
Series
Split
Synchronize
Off
For setting the recording trigger for the external recording device connected to the
[IEEE1
3 94] terminal.
Ext : Outputs recording trigger to the external system only. (Recording is not
performed by the internal system.)
Series : Outputs recording trigger to enable consecutive recording by the internal
and external systems.
Split : Outputs separate recording triggers to the internal and external systems.
Synchronize : Outputs recording trigger simultaneously to the internal and external
systems.
Off : Recording trigger is not output to the external system.
Memo :
●
This item is selectable only in Camera mode. It cannot be set when recording is in
progress on the camera recorder or an external device.
●
When the external recording device connected to the [IEEE1 3 94] terminal switches to the
recording mode according to the settings, switching of operation mode using the
[CAM/MEDIA] button and the Clip Review function will be disabled.
●
When [1 3 94 Rec Trigger] is set to
A
Split
B
, the [REC] button on the side of the camera
recorder becomes a Rec Start/Stop button for the external device. ( A Page 12)
●
When the [REC] button is pushed immediately after the power is turned on or after a
menu setting is changed, recording with the external device might start about 10 seconds
late.
1 3 94 Auto Power
Off
Enable
Disable
For setting whether to automatically turn off the power of the external recording device
connected to the [IEEE1
3 94] terminal when the [POWER] switch of the camera recorder is
turned off.
Enable : Turns off the power automatically.
Disable : Disables this function.
Memo :
●
The IEEE1 3 94 control is only valid for external devices with a POWER OFF button.
Mode LED On
Off
For specifying the illumination settings of the operation mode indicator on the side control
panel of the camera recorder.
On
: Lights up as below according to the operation mode. ( A Page 8)
Off : Turns off the indicator.
Operation Mode Color
Camera Mode Blue/Purple
Media Mode (SD Card Mode) Green
Media Mode (IEEE1 3 94 Mode) Orange
USB Mode Orange