JVC GY-HM790U, Instructions Manual

Page: 93 / 144

89
Shooting Assist Item
* Default values are indicated in bold characters.
Item Setting Values Function
Focus Assist
ACCU-Focus
Normal
For specifying the operation when the [FOCUS ASSIST] button on the camera recorder is
pressed. (
A
Page 3 7)
ACCU-Focus : Enables the Focus Assist and ACCU-Focus (forced focus) functions. The
depth of field of the object becomes shallower to enable easier focusing. The
ACCU-Focus function switches automatically to
A
Off
B
after about 10 seconds.
Normal : Enables only the Focus Assist function. The focused area is displayed in color
to enable easier focusing. Display color can be specified with [Color].
Color Blue
Green
Red
For setting the display color of the focused area when Focus Assist is activated.
Blue
: Displays the focused area in blue.
Green : Displays the focused area in green.
Red : Displays the focused area in red.
Level
High
Middle
Low
For setting the display range of the focused area when Focus Assist is activated.
High
: Sets the display range wider than Middle.
Middle : Sets the display range to standard.
Low : Sets the display range narrower than Middle.
Zebra 2Patterns
1Pattern
For selecting the number of zebra patterns to be displayed.
2Patterns
: Displays 2 types of zebra patterns (Zebra1 and Zebra2).
1Pattern : Displays 1 type of zebra pattern (Zebra1).
Top1
Over,
100% to 85%,
8 0%,
75% to 5%
(In 5 % increments)
For setting the maximum luminance level for the
A
Zebra1
B
display.
Memo :
●
The Bottom1 value is automatically adjusted during setting of the Top1 value to ensure that a
Top1 > Bottom1 relationship is always maintained.
Bottom1 100% to 75%,
70%,
65% to 0%
(In 5 % increments)
For setting the minimum luminance level for the
A
Zebra1
B
display.
Memo :
●
The Top1 value is automatically adjusted during setting of the Bottom1 value to ensure that a
Top1 > Bottom1 relationship is always maintained.
Top2 Over,
100% to 5%
(In 5 % increments)
For setting the maximum luminance level for the
A
Zebra2
B
display.
Memo :
●
This item cannot be selected when [Zebra] is set to
A
1Pattern
B
.
●
The Bottom2 value is automatically adjusted during setting of the Top2 value to ensure that a
Top2 > Bottom2 relationship is always maintained.
Bottom2 100% to 85%,
8 0%,
75% to 0%
(In 5 % increments)
For setting the minimum luminance level for the
A
Zebra2
B
display.
Memo :
●
This item cannot be selected when [Zebra] is set to
A
1Pattern
B
.
●
The Top2 value is automatically adjusted during setting of the Bottom2 value to ensure that a
Top2 > Bottom2 relationship is always maintained.
Peaking
Frequency High
Middle
Low
For setting the fre q uency range for applying contour enhancement using the [VF PEAKING]
adjustment knob or [LCD P/-] button.
High
: Emphasizes the high fre q uency range.
Middle : Emphasizes the intermediate fre q uency range.
Low : Emphasizes the low fre q uency range.