84
11. MENU SCREENS
The HEADER REC menu screen is used for settings related to the HEADER REC function. (
☞
page 58)
11-12 HEADER REC Menu Screen
START KEY
TC DATA
UB DATA
BARS TIME
BLACK TIME
PAGE BACK
STOP+VTR
DISABLE
EXECUTE
ZERO PRESET
CANCEL
EXECUTE
ZERO PRESET
CANCEL
0 SEC
to
99 SEC
0 SEC
to
99 SEC
–––––
Sets whether the HEADER REC operation should be executed when
the VTR trigger button is pressed while the STOP button is pressed.
STOP+VTR : HEADER REC operation is executed.
DISABLE
: HEADER REC operation is not executed.
Sets the time code value for the point when the Record-Standby mode
is engaged following completion of HEADER REC.
EXECUTE
: Confirms the set time code.
ZERO PRESET : Resets all time codes to zero (0).
CANCEL
: Clears the set time code.
The Frame mode will in accordance with the setting of the DROP/NON
DROP item on the TC/UB/CLOCK menu screen.
* The time code value at the point when the Record-Standby mode is
engaged may differ some frames from the value set for this item.
Sets the user’s bits of the HEADER REC section.
EXECUTE
: Confirms the set user’s bits.
ZERO PRESET : Resets all user’s bits data to zero (0).
CANCEL
: Clears the set user’s bits.
Sets the duration (seconds) in which the color bar signal and test tone
(1 kHz) is recorded during HEADER REC. (1-sec steps)
Sets the duration (seconds) in which the black signal is recorded during
HEADER REC. (1-sec steps)
The TC/UB/CLOCK menu screen returns when the SHUTTER dial is
pressed.
DISABLE
EXECUTE
EXECUTE
30 SEC
30 SEC
–––––
Item
Function
Variation Range
Initial Setting
MEMO:
The user’s bits for the normal recording section are set on the TC/
UB/CLOCK menu screen.
e11_dv5100u(71_87)e.p65
12/10/04, 2:30 PM
84