JVC GY-DV5100, User Manual

Page: 47 / 103

47
6. SETTING AND ADJUSTMENTS BEFORE SHOOTING
MONITOR
EDITSEARCH
FILTER
STATUS
SHUTTER
MENU
AUTO IRIS
BACK L
NORMAL
SPOT L STRETCH
NORMAL
COMPRESS
FULL AUTO BLACK LOLUX
MODE
POWER
ON OFF
VTR
OPEN
VTR
CAM
1 3200K
5600K
5600K
5600K
ND /
/ ND
2
.3
.4 1 8
1 64
CH-1
AUDIO INPUT
AUDIO SELECT
CH-2
CH-1 CH-2
FRONT
REAR
AUTO
MANUAL
AUDIO
LEVEL
CH-1 CH-2
PULL
OPEN
LCD BRIGHT DISPLAY
POWER
ON OFF
VTR
GAIN
OUTPUT
CAMCAM
BARSBARS
ON
OFFOFF
PRST
B
A
AUT
OKNEE
WHT
.BAL
MODE
M
L
H
2.
3.
1.
A D C B
VF
ZEBRA
AUDIO
LEVEL CH-1
OFF
ON
SKIN
AREA AUTO
WHITE
ACCU
FOCUS
VTR
5
4.
5.
CAM
indicator
6-2 Screen Size (4:3/LETTER/SQUEEZE) Mode Selection
6-1 Camera Settings
The screen size of recorded images can be selected with the ASPECT RATIO item on the CAMERA OPERATION menu screen.
☞
See page 75.
●
To record using the standard screen, set ASPECT RATIO to 4:3.
●
When ASPECT RATIO is set to LETTER, the image is recorded in a 16:9 aspect ratio with the upper and lower parts of the image
cut. In this case, the viewfinder screen or LCD will show the 16:9 aspect ratio image with the upper and lower parts of the image
cut.
●
When the ASPECT RATIO is set to SQUEEZE, 16:9 image is output vertically squeezed to fit 4:3 screens.
MEMO:
●
The safety zone of the standard screen and the 16:9 screen can be displayed in the viewfinder or LCD by setting the
SAFETY ZONE item on the LCD/VF (1/2) menu screen.
☞
See page 81.
●
When ASPECT RATIO is set to LETTER or SQUEEZE, 16:9 aspect ratio distinction ID signal is output from the Y/C OUT
terminal.
●
When the DATE REC item on the TIME/DATE screen is set to “BARS” or “BARS+CAM” while ASPECT RATIO item in
CAMERA OPERATION menu is set to LETTER, the screen size will be fixed at an aspect ratio of 4:3.
1.
POWER SUPPLY
1 First place a charged battery pack in the battery case on
the rear section of the unit. If battery pack is not used,
connect DC power to the DC INPUT connector on the
rear section of the unit using the AC power adapter (AA-
P250) to supply DC 12 V current.
2
Set the POWER switch to ON.
2.
SWITCH positions
A. MODE switch: Camera mode (CAM indicator should be
on).
B. [GAIN] switch: Set to L. The L position is always 0 dB.
C. [OUTPUT] switch: Set to CAM-AUTO KNEE OFF.
D. [WHT. BAL] (Auto White Balance) switch: Set to A or B.
3.
Set the lens’ iris mode switch to “A” (AUTO IRIS side)
4.
Choose the proper color temperature conversion filter.
5.
Using the SHUTTER dial, set the shutter speed to OFF
(1/60).
FILTER Suitable Location
1 3200K Indoors, dark outdoors
2 5600K+1/8ND Outdoors under clear sky
3 5600K Outdoors
4 5600K+1/64ND
Outdoors under extremely
bright conditions
e08_dv5100u(47_53)e.p65 12/15/04, 3:53 PM 47