manualshive.com logo in svg

JVC GY-DV5100, User Manual, Page: 16 / 103

Share
Download
JVC GY-DV5100 User Manual Download Page 16

16

2. CONTROLS, INDICATORS AND CONNECTORS

STATUS

SHUTTER

MENU

AUTO IRIS

BACK L
NORMAL
SPOT L

STRETCH
NORMAL
COMPRESS

FULL AUTO

BLACK

LOLUX

MODE

POWER

ON

OFF

VTR

VTR

CAM

1

3200K
5600K
5600K
5600K

ND

/

/ ND

2
.3
.4

1 8

1 64

CH-1

AUDIO INPUT

AUDIO SELECT

CH-2

CH-1

CH-2

FRONT

REAR

AUTO

MANUAL

AUDIO
LEVEL

CH-1

CH-2

PULL

OPEN

LCD BRIGHT

DISPLAY

COUNTER

CH-1

AUDIO IN

AUDIO SELECT

CH-2

CH-1

CH-2

FRONT

REAR

AUTO

MANUAL

TC GENE.

TC

MONITOR

SELECT

AUDIO
LEVEL

REAR

AUDIO IN

CH-1

CH-2

CH-1

MIX

CH-2

CH-1

CH-2

LINE

MIC

+48V

FREE
REC

UB

LCD BRIGHT

DISPLAY

FRONT MIC +48V

OFF

ON

C

D

0

E

B

A

REGEN

PRST

View with cover open.

2-2 Right Side Section (Cont’d)

0

[CH-1/CH-2 AUDIO IN] CH-1/CH-2 audio input
selector switch

This switch is used to select the input sound of the CH-1 or
CH-2 audio channel. It is selected for each of the CH-1 and
CH-2 channels.

FRONT

: The sound from the FRONT MIC IN connector

on the front side section is input.

REAR

: The sound from the REAR AUDIO IN connector

on the rear side section is input.

A

[FRONT MIC +48V] Front microphone power

supply selector switch

This is set in accordance to the camera microphone
connected to the FRONT MIC IN connector.

ON

: Set to this position when the included

microphone or another req48 V power
supply (phantom microphone) is connected.

OFF

: Set to this position when connecting a

microphone that does not r48 V power
supply.

B

[CH-1/CH-2 REAR AUDIO IN] CH-1/CH-2 Rear
audio input signal selector switch.

This switch is used to select the input sound signal from
the REAR AUDIO IN connector.

LINE

: Set to this position when connected to audio

equipment, etc. The reference input level is +4 dBs.

MIC

: Set to this position when the microphone is

connected. The reference input level is -60 dBs.

+48V

: Set to this position when a microphone requiring

+48 V power supply (phantom microphone, etc.) is
connected. This connector su48 V DC
current.

CAUTION:

When connecting a component that does not require
+48 V power supply, make sure that the switch is not
set to +48V before the component is connected.

C

[MONITOR SELECT] Audio monitor selector switch

This switch is used to select the monitor sound output and
playback sound output from the monitoring speaker 

1

 on

page 15 or the PHONES 

5

 jack on page 19.

CH-1

: The CH-1 channel audio is output.

MIX

: CH-1 and CH-2 channel audio are output mixed.

When this setting is selected, the menu screen can
be used to select whether the mixed sound or stereo
sound should be output via the PHONES jack.
(AUDIO MONITOR item on the AUDIO/VIDEO
menu screen)
When AUDIO MONITOR in the AUDIO/VIDEO
menu screen is set to “STEREO”, only the audio of
CH-1 is output from the monitoring speaker.

CH-2

: The CH-2 channel audio is output.

☞

 See “Outputting CH-3, CH-4 Channel Audio” on page 64.

☞

 See “AUDIO/VIDEO Menu Screen” on page 79.

CAUTION:

Make sure to move switches all the way. Do not leave
a switch stopped in a midway position. Noise will be
generated and operation irregularities will occur.

D

[COUNTER] Counter display switch

Selects the contents displayed on the TC counter of the
LCD monitor or in the viewfinder. (This switch works when
the TC/UB item on the LCD/VF (2/2) menu screen is set to
ON.)

TC

: Set to this position to display time code values.

UB

: Set to this position to display the user’s bits values.

E

[TC GENE.] Time code generator setting switch

Switch for setting the time code generator to preset mode
or regeneration mode. It is also used to select the time code
run mode when the preset mode is selected.

PRST-FREE

: The preset mode is selected, and the time

code run mode becomes the FREE run
mode.
Set to this position to record with the time
code or user’s bits set anew (preset). In this
setting, the time code always operates in the
run mode.

* If this setting is used when recording scenes one after

another, the time codes become discontinuous at the
transition points between scenes.

PRST-REC

: The preset mode is selected, and the time

code run mode becomes the REC run mode.
Set to this position to record with the time
code or user’s bits set anew (preset). The
time code operates in the run mode during
recording only. If this setting is used when
recording scenes one after another, the time
codes are recorded as continuous time
codes.

REGEN

: Regeneration mode, in which the unit reads

existing time codes on the tape and records
time codes in continuation of the existing
ones. Set to this position when you want to
add additional time codes to time codes
already recorded on the tape.

MEMO:

Preset of time code and user’s bits is performed on the
TC/UB/CLOCK menu.

☞

 See “TIME CODE OPERATION” on page 67.

☞

 See “TC/UB/CLOCK Menu Screen” on page 83.

e03_dv5100u(12_20)e.p65

12/15/04, 3:51 PM

16

Summary of Contents for GY-DV5100








































































































Reviews:

No comments