51
6. SETTING AND ADJUSTMENTS BEFORE SHOOTING
MONITOR
EDITSEARCH
FILTER
STATUS
SHUTTER
MENU
AUTO IRIS
BACK L
NORMAL
SPOT L
STRETCH
NORMAL
COMPRESS
FULL AUTO
BLACK
LOLUX
MODE
POWER
ON
OFF
VTR
OPEN
VTR
CAM
1
3200K
5600K
5600K
5600K
ND
/
/ ND
2
.3
.4
1 8
1 64
CH-1
AUDIO IN
AUDIO SELECT
CH-2
CH-1
CH-2
FRONT
REAR
AUTO
MANUAL
AUDIO
LEVEL
CH-1
CH-2
PULL
OPEN
LCD BRIGHT
DISPLAY
COUNTER
CH-1
AUDIO IN
AUDIO SELECT
CH-2
CH-1
CH-2
FRONT
REAR
AUTO
MANUAL
TC GENE.
TC
MONITOR
SELECT
AUDIO
LEVEL
REAR
AUDIO IN
CH-1
CH-2
CH-1
MIX
CH-2
CH-1
CH-2
LINE
MIC
+48V
PRST
REGEN
FREE
REC
UB
LCD BRIGHT
DISPLAY
VF
ZEBRA
AUDIO
LEVEL CH-1
OFF
ON
SKIN
AREA
AUTO
WHITE
ACCU
FOCUS
VTR
5
FRONT MIC +48V
OFF
ON
PHONES
DC OUT
DC IN
DV
INT
REAR AUDIO IN
TALLY
CH-1
CH-2
6-7 Audio Input Signal Selection
REAR AUDIO IN
connector
FRONT MIC IN
connector
REAR AUDIO IN
(LINE/MIC) switch
CH-1 AUDIO IN switch
CH-2 AUDIO IN switch
■
Selecting the REAR AUDIO IN connector
Select the sound to be input to the REAR AUDIO IN connector
using the REAR AUDIO IN (LINE/MIC) switch. The setting is
made individually for both the REAR AUDIO IN connector.
LINE
:
Set to this position when connected to audio
equipment, etc.
The reference input level is +4 dBs.
MIC
:
Set to this position when using a monaural
microphone.
The reference input level is –60 dBs.
+48 V
:
Set to this position when a microphone
(phantom microphone) req48 V DC
power supply is connected.
CAUTION:
Before connecting a component that does not r48
V power supply, make sure that the REAR AUDIO IN (LINE/
MIC) switch is not set to +48 V.
Neglecting this could cause damage to the connected
component.
FRONT MIC +48V
(ON/OFF) switch
The GY-DV5100 is provided with the FRONT MIC IN connector
and the REAR AUDIO IN connector for audio input.
Two channels of sound can be recorded on the tape in digital
PCM format. Using the AUDIO IN switch, select for each
channel (CH-1 and CH-2) whether the sound to be recorded
should be the sound from the FRONT MIC IN connector or the
sound from the REAR AUDIO IN connector.
■
Selecting the CH-1 channel input sound
Make the selection using the CH-1 AUDIO IN switch.
FRONT :
The sound from the FRONT MIC IN connector is
recorded on the CH-1 channel.
REAR :
The sound from the REAR AUDIO IN connector is
recorded on the CH-1 channel.
■
Selecting the CH-2 channel input sound
Make the selection using the CH-2 AUDIO IN switch.
FRONT :
The sound from the FRONT MIC IN connector is
recorded on the CH-2 channel.
REAR :
The sound from the REAR AUDIO IN connector is
recorded on the CH-2 channel.
■
Selecting the FRONT MIC IN connector
Select the microphone to connect to the FRONT MIC IN
connector using the FRONT MIC +48V (ON/OFF) switch.
ON
:
Set to this position when a microphone requiring
+48 V power supply (phantom microphone) is
connected.
Use this setting to connect the included
microphone to the FRONT MIC IN connector.
OFF
:
Set to this position when connecting a
microphone that does not r48 V power
supply.
CAUTION:
Before connecting a component that does not r48 V
power supply, make sure that the FRONT MIC +48V (ON/
OFF) switch is not set to ON.
Neglecting this could cause damage to the connected
component..
e08_dv5100u(47_53)e.p65
12/15/04, 4:15 PM
51
