JVC GR-DVP8 Instructions Manual Download

Page: 22 / 84

Master Page: Left

These are some basic types of connections. When
making the connections, refer also to your VCR and
TV instruction manuals.

Connect when your TV/VCR has S-VIDEO IN
and A/V input connectors. In this case, it is not
necessary to connect the yellow video cable.

Connect when your TV/VCR has only A/V input
connectors.

*** Not required for watching still images only.
**** When connecting the cable, open the cover.

Make sure all units are turned off.

Connect the camcorder to a TV or VCR as shown
in the illustration.

If using a VCR

, go to step

If not

, go to step

Connect the VCR output to the TV input,
referring to your VCR’s instruction manual.

Turn on the camcorder, the VCR and the TV.

Set the VCR to its AUX input mode, and set the
TV to its VIDEO mode.

To choose whether or not the following displays
appear on the connected TV…

●

Date/Time
Set “DATE/TIME” to “AUTO”, “ON” or “OFF”.
(

墌

pg. 31, 41)

Or, press

DISPLAY

on the remote control to turn

on/off the date indication.

●

Time Code
Set “TIME CODE” to “ON” or “OFF”.
(

墌

pg. 31, 41)

●

Indications other than date/time and time code
Set “ON SCREEN” to “OFF”, “LCD” or “LCD/TV”.
(

墌

pg. 31, 41)

NOTES:

●

It is recommended to use the AC Power Adapter/
Charger as the power supply instead of the
battery pack. (

墌

pg. 11)

●

To monitor the picture and sound from the
camcorder without inserting a tape or memory
card, set the camcorder’s Power Switch to “

” or

“

”, then set your TV to the appropriate input

mode.

●

Make sure you adjust the TV sound volume to its
minimum level to avoid a sudden burst of sound
when the camcorder is turned on.

●

If you have a TV or speakers that are not specially
shielded, do not place the speakers adjacent to the
TV as interference will occur in the camcorder
playback picture.

●

While the S/AV/Editing cable is connected to the
S/AV connector, sound cannot be heard from the
speaker.

●

How to connect the S/AV/Editing cable...

•Insert the cable straight into the S/AV

connector.

•To disconnect the S/AV/Editing cable, pull the

cable straight out.

Connections To A TV Or VCR

VCR

To S/AV connector

S/AV/Editing cable

(provided)

Connector

Cover****

Not connected

Black to S-VIDEO IN*

Yellow to VIDEO IN**

White to AUDIO L IN***

Red to AUDIO R IN***

To S/AV connector

S/AV/Editing cable

(provided)

VIDEO PLAYBACK (cont.)

GR-DVP9US.book Page 22 Wednesday, January 22, 2003 5:35 PM

Summary of Contents for GR-DVP8




















































































Search results

Summary of Contents for GR-DVP8

Reviews:

Related manuals for GR-DVP8

Brands by name

Popular brands

JVC GR-DVP8, Instructions Manual

Search results

Summary of Contents for GR-DVP8

Reviews:

Related manuals for GR-DVP8

Brands by name

Popular brands