JVC GR-DVP7 Instructions Manual Download Page 84

Page: 84 / 104

Master Page: Left

GR-DVP7U_80-103.fm

Page 84

Advanced features

SYMPTOM

POSSIBLE CAUSES

CORRECTIVE ACTION

14.

The focus does not adjust
automatically.

14.

• Focus is set to the Manual

mode.

• The recording was done in a

dark place, or the contrast
was low.

• The lens is dirty or covered

with condensation.

14.

• Set Focus to the Auto mode.

(

墌

pg. 54)

• Clean the lens and check the

focus again. (

墌

pg. 91)

15.

In the 5-Second mode,
recording ends before
5 seconds have elapsed.

15.

• The 5-Second mode is set to

“Anim.” in MANUAL Menu.

15.

• Set “5S” to “5S” in MANUAL

Menu. (

墌

pg. 45)

16.

Snapshot mode cannot be
used.

16.

• The Squeeze mode

(SQUEEZE) is selected.

16.

• Disengage the Squeeze

(SQUEEZE) mode.
(

墌

pg. 46)

17.

The color of Snapshot looks
strange.

17.

• The light source or the

subject does not include
white. Or there are various
different light sources behind
the subject.

• The Sepia (SEPIA) or

Monotone (MONOTONE)
mode is activated.

17.

• Find a white subject and

compose your shot so that it
also appears in the frame.
(

墌

pg. 27, 52)

• Disengage the Sepia (SEPIA)

and Monotone
(MONOTONE). (

墌

pg. 42)

18.

The image taken using
Snapshot is too dark.

18.

• Shooting was performed

under backlit conditions.

18.

• Press

BACKLIGHT

(

墌

pg. 56)

19.

The image taken using
Snapshot is too bright.

19.

• The subject is too bright.

19.

• Set “

PROGRAM AE” to

“SPOTLIGHT”. (

墌

pg. 41)

20.

White Balance cannot be
activated.

20.

• The Sepia (SEPIA) or

Monotone (MONOTONE)
mode is activated.

20.

• Disengage the Sepia (SEPIA)

or Monotone (MONOTONE)
mode before setting White
Balance. (

墌

pg. 42, 42)

21.

Wipe/Fader effects do not
work.

21.

• The Power Switch is set to

“

”.

21.

• Set the Power Switch to “

”.

(

墌

pg. 14)

22.

The Black & White Fader does
not work.

22.

• The Sepia (SEPIA) or

Monotone (MONOTONE)
mode is activated.

22.

• Disengage the Sepia (SEPIA)

and Monotone
(MONOTONE). (

墌

pg. 42)

23.

Program AE with special
effects does not work.

23.

• The Power Switch is set to

“

”.

23.

• Set the Power Switch to “

”.

(

墌

pg. 14)

24.

Even when Slow Shutter is not
selected, the image looks like
it is activated.

24.

• When shooting in the dark,

the unit becomes highly
sensitive to light and the
image takes on an effect
similar to Slow Shutter.

24.

• If you want the lighting to

look more natural, set “GAIN
UP” to “ACG” or “OFF”.
(

墌

pg. 38, 44)

TROUBLESHOOTING (cont.)

GR-DVP7U_80-103.fm Page 84 Friday, March 1, 2002 11:43 AM

Downloaded From VideoCamera-Manual.com Manuals

Summary of Contents for GR-DVP7








































































































Search results

Summary of Contents for GR-DVP7

Reviews:

Related manuals for GR-DVP7

Brands by name

Popular brands

JVC GR-DVP7, Instructions Manual

Search results

Summary of Contents for GR-DVP7

Reviews:

Related manuals for GR-DVP7

Brands by name

Popular brands