JVC GR-DVP7 Instructions Manual Download Page 29

Page: 29 / 104

Master Page: Right

GR-DVP7U_26-36.fm

Page 29

You can view video clips (

墌

pg. 60) stored in the

memory card.

Load a memory card. (

墌

pg. 17)

Set the

VIDEO/MEMORY

Switch to “MEMORY”.

Set the Power Switch to “

” while pressing

down the Lock Button located on the switch.

Open the LCD monitor fully, or pull out the
viewfinder fully.

●

The type of file (IMAGE, E-MAIL CLIP or
SOUND) which has been played back at the
last time is displayed.

If the image playback (IMAGE) or the digital
sound playback (SOUND) screen appears, press

SET/SELECT

. The MEMORY SELECT screen

appears.

Press

–

to select

“E-MAIL CLIP”, and
press

SET/SELECT

. The

video clip playback
screen (E-MAIL CLIP)
appears.

Turn the

SHUTTLE

SEARCH

Ring to the

left (

) to select the previous file. Turn the

SHUTTLE SEARCH

Ring to the right (

) to

select the next file.

●

Pressing

INFO

gives you details on the

displayed file. (

墌

pg. 30)

●

You can also look for the desired file using
Index Screen. (

墌

pg. 30)

To start playback, press

To stop playback, press

12 sound effects are pre-stored in the provided
memory card. You can listen to the sound effects
stored in the memory card. The sound effects can be
also dubbed onto a tape. (

墌

pg. 57)

Load the provided memory card. (

墌

pg. 17)

Set the

VIDEO/MEMORY

Switch to “MEMORY”.

Set the Power Switch to “

” while pressing

down the Lock Button located on the switch.

Open the LCD monitor fully, or pull out the
viewfinder fully.

●

The type of file (IMAGE, E-MAIL CLIP or
SOUND) which has been played back at the
last time is displayed.

If the image playback (IMAGE) or the video clip
playback (E-MAIL CLIP) screen appears, press

SET/SELECT

. The MEMORY SELECT screen

appears.

Press

–

to select

“SOUND”, and press

SET/SELECT

. The

digital sound playback
screen (SOUND)
appears.

To play back to the
sound effect, press

●

All the sounds are played back in ascending
order.

NOTES:

●

In the digital sound playback screen,
• Turn the

SHUTTLE SEARCH

Ring to the left

(

) to select the previous file. Turn the

SHUTTLE SEARCH

Ring to the right (

) to

select the next file.

• Pressing

INFO

gives you details on the displayed

file. (

墌

pg. 30)

●

You can also look for the desired file using Index
Screen. (

墌

pg. 30)

Playback Of Video Clips

E - M A I L C L I P

Playback Of Digital Sound Effects

EXPLOSION

Explosion

SIREN

Siren

LAUGHTER

Laughter

RACE CAR

Racing car

DOOR BELL

Door bell

BUZZER

Buzzer

FANFARE

Fanfare

APPLAUSE

Applause

CHEERS

Cheers

BOING

Booing

SCREAM

Scream

JEERS

Jeers

S O U N D

GR-DVP7U_26-36.fm Page 29 Wednesday, February 27, 2002 6:01 PM

Downloaded From VideoCamera-Manual.com Manuals

Summary of Contents for GR-DVP7








































































































Search results

Summary of Contents for GR-DVP7

Reviews:

Related manuals for GR-DVP7

Brands by name

Popular brands

JVC GR-DVP7, Instructions Manual

Search results

Summary of Contents for GR-DVP7

Reviews:

Related manuals for GR-DVP7

Brands by name

Popular brands