JVC GR-DVP7 Instructions Manual Download Page 52

Page: 52 / 104

Master Page: Left-Heading0

GR-DVP7U_37-79.fm

Page 52

FEATURES FOR RECORDING

This feature lets you record still images that look like
photographs onto a tape.

Set the

VIDEO/MEMORY

Switch to “VIDEO”.

Set the Power Switch to “

” while pressing down

the Lock Button located on the switch.

Open the LCD monitor fully, or pull out the
viewfinder fully.

Set “SNAP MODE” to the desired mode.
(

墌

pg. 38, 44)

Press

SNAPSHOT

●

The “

” indication appears and a still

image will be recorded for approx. 6 seconds,
then the camcorder re-enters the Record-
Standby mode.

●

You can perform Snapshot also during
recording. A still image will be recorded for
approx. 6 seconds, then the normal recording
resumes.

●

Regardless of the Power Switch position (“

”

or “

”), Snapshot recording takes place using

the selected Snapshot mode.

NOTES:

●

To remove the shutter sound, refer to “BEEP” on
page 47.

●

If Snapshot recording is not possible, the “

”

indication blinks when

SNAPSHOT

is pressed.

●

If Program AE with special effects (

墌

pg. 41) is

engaged, certain modes of Program AE with
special effects are disabled during Snapshot
recording. In such a case, the icon blinks.

●

SNAPSHOT

is pressed when “DIS” is set to

“ON” (

墌

pg. 45), the Stabilizer will be disabled.

●

During playback as well, all snapshot modes
except Nega mode are available when
“

COPY” is set to “OFF” in VIDEO Menu.

(

墌

pg. 50) However, the shutter sound is not

heard.

●

During Snapshot recording, the image displayed
in the viewfinder may be partially missing.
However, there is no effect in the recorded image.

●

When the S/AV/Editing cable is connected to the
S/AV connector, the shutter sound is not heard
from the speaker, however it is recorded onto the
tape.

Motor Drive Mode

Keeping

SNAPSHOT

pressed in step

provides an

effect similar to serial photography. (Interval
between still images: approx. 1 second)

●

The Motor Drive mode is disabled when “REC
SELECT” is set to “

”. (

墌

pg. 38, 49)

Snapshot (For Video Recording)

Power Switch

VIDEO/MEMORY

Switch

MENU Button

SET/SELECT Button

+, – Button

SNAPSHOT Button

Lock Button

GR-DVP7U_37-79.fm Page 52 Thursday, February 28, 2002 8:28 AM

Downloaded From VideoCamera-Manual.com Manuals

Summary of Contents for GR-DVP7








































































































Search results

Summary of Contents for GR-DVP7

Reviews:

Related manuals for GR-DVP7

Brands by name

Popular brands

JVC GR-DVP7, Instructions Manual

Search results

Summary of Contents for GR-DVP7

Reviews:

Related manuals for GR-DVP7

Brands by name

Popular brands