JVC GR-DVL9000, Instructions Manual

Page: 10 / 92

10
EN
Charging The Battery Pack
You can charge one battery pack at a time, or two consecutively.
GETTING STARTED
ATTACH
NOTES:
●
If you connect the camcorder’s DC cord to the
adapter during battery charging, power is
supplied to the camcorder and charging stops.
●
When using the AC Power Adapter/Charger, be
sure to use the supplied power cord only.
●
The AC Power Adapter/Charger is for use with the
BN-V814U Battery Pack only.
●
When charging the Battery Pack for the first time
or after a long storage period, the Charger
Indicator may not light. In this case, remove the
Battery Pack from the AC Power Adapter/Charger,
then try charging again.
●
Since the AC Power Adapter/Charger processes
electricity internally, it becomes warm during use.
Be sure to use it only in well-ventilated areas.
●
If the battery operation time remains extremely
short even after having been fully charged, the
battery is worn out and needs to be replaced.
Please purchase a new one.
To AC outlet
Power cord
Charger indicator 2
Power lamp
Charger
indicator 1
DETACH
1 SUPPLY POWER TO CHARGER
Plug the AC Adapter/Charger’s power cord in
to an AC outlet. The power lamp comes on.
2 ATTACH BATTERY/BATTERIES
Attach while making sure the marks are
facing down and aligned with the correspond-
ing marks on the AC Power Adapter/Charger.
• The Charger Indicator (1 or 2) begins blinking to
indicate charging has started.
3 CONFIRM STATUS
When the charger indicator stops blinking but
stays lit, charging is finished.
• If two batteries are attached to the charger, they
will be charged in the order that they were
attached.
4
DETACH BATTERY/BATTERIES
Slide the battery or batteries in the direction of
the arrow and lift off.
• Remember to unplug the AC Adapter/Charger’s
power cord from an AC outlet.
Battery pack BN-V814U
AC Power
Adapter/Charger
AA-V80U
BATTERY ONE TWO
BN-V814U Approx. 110 min. Approx. 220 min.
DC OUT jack
Power cord
CHARGING TIME