JVC GR-DV3000 Instructions Manual Download

Page: 78 / 96

• The optional headphones are not

connected to the headphone
connector.

• The sound volume of the

headphone connector was not
adjusted appropriately. The sound
volume at this point is the same as
the level it was adjusted to during
playback.

• The Power Switch is set to “

” or

“

”.

• The Power Switch is set to “

” or

“

”.

• The VIDEO/MEMORY Switch is set

to “VIDEO”.

• Your TV has AV input terminals, but

is not set to its VIDEO mode.

• The cassette holder cover is open.

• During playback of the unrecorded

portion, High-speed Search and still
playback, LCD monitor indications
appear distorted. This is not a
defect.

• The speaker volume is too great.

• Since the analogue input mode is

engaged, the camcorder is in the
Record-Standby mode.

————

• Connect the optional headphones

to the headphone connector
(

pg. 82, 83).

• Adjust the sound volume during

playback (

pg. 25).

• Set the Power Switch to “

”

(

pg. 25).

• Set the Power Switch to “

”

(

pg. 26).

• Set the VIDEO/MEMORY

Switch to “MEMORY”.

• Set the TV to the mode or channel

appropriate for tape playback
(

pg. 54, 55).

• Close the cassette holder cover

(

pg. 12).

————

• Turn the speaker volume down

(

pg. 25).

• Set “S/AV INPUT” to “OFF” in the

Menu Screen (

pg. 32).

• Clean the video heads with an

optional cleaning cassette
(

pg. 90).

• Wipe them gently with soft cloth.

Wiping strongly can cause damage
(

pg. 80).

SYMPTOM

POSSIBLE CAUSES

CORRECTIVE ACTION

During recording, sound
cannot be heard.

Play, Rewind and Fast-
Forward functions do not
work.

A memory card cannot be
played back.

The tape is moving, but
there is no picture.

The LCD monitor image is
distorted.

Images on the LCD monitor
are jittery.

There is no playback picture
on the connected TV.

Blocks of noise appear
during playback, or there is
no playback picture and the
screen becomes blue.

The LCD monitor, the
viewfinder and the lens
have become dirty (ex.
fingerprints).

TROUBLESHOOTING

(cont.)

Summary of Contents for GR-DV3000

































































































Search results

Summary of Contents for GR-DV3000

Reviews:

Related manuals for GR-DV3000

Brands by name

Popular brands

JVC GR-DV3000, Instructions Manual

Search results

Summary of Contents for GR-DV3000

Reviews:

Related manuals for GR-DV3000

Brands by name

Popular brands