Master Page: Right
— 5 —
Follow the procedure described below to
install the software. From the [SETUP]
screen in step
2
, you can install the
following drivers or software. Quit any other
software you are using. (Check that there
are no other application icons on the status
bar.)
USB Mass Storage Class driver
This driver allows your PC to read and write
memory cards in the camcorder.
Windows
®
Me/2000/XP:
Since there is no need to install this driver,
the item is not displayed. Simply connect
the camcorder to the PC with a USB cable,
and you can read and write memory cards
in the camcorder.
Windows
®
98SE:
Be sure NOT to connect the USB cable
between the camcorder and the PC before
installing the driver.
CyberLink DVD Solution
PowerProducer 2 Gold
PowerProducer 2 Gold is software for
creating movie discs incorporating not only
video but also slideshows. This software
uses a simple wizard format for creating a
wide range of different format discs. You
can also edit imported video. You can
import video from the camera, edit it, and
then create a slideshow from still images.
You can create a customized menu for the
video or slideshow and write the contents to
DVD or other media.
PowerDirector 3
PowerDirector 3 is software for easily
capturing video from a camcorder and for
easily editing MPEG, AVI, and other video
files, still images, and other contents for
creating a movie. This software has an
interface that allows editing in either
timeline or storyboard mode, maintains
superior image quality, uses SVRT for high-
speed rendering, and has a host of other
advanced video editing features. You can
export video files as DV format (AVI) to
record on a DV tape.
NOTE:
If PowerProducer or PowerDirector is
already installed, uninstall the software,
then install the supplied CyberLink DVD
Solution.
Digital Photo Navigator 1.0
This application is used to organize still
images and convert them into a variety of
formats.
G.726 decoder
This is an audio decoder for video clips
created by the camcorder (extension “.asf”).
NOTE:
Install G.726 decoder only when the
camcorder is equipped with E-Mail Clip
Recording function.
1
Load the provided CD-ROM into
the PC.
After a moment, the [SETUP] screen
appears.
●
From the [SETUP] screen, you can
install the desired driver or software.
●
If the [SETUP] screen does not
appear, double-click the CD-ROM
icon in the [My Computer] window.
2
Click [Install] on the right side
of the desired software and
follow the on screen
instructions to complete the
installation.
The installation of the selected driver
or software starts. The procedure
differs depending on the driver or the
software.
Software Installation
(Windows
®
)
CONTINUED ON NEXT PAGE
M5D2+DSC_InstaGuide.fm Page 5 Monday, October 25, 2004 2:34 PM
