JVC FS-Y1 Instructions Manual Download

Page: 11 / 88

Connecting up

Connection

There is no difference between the left and right
speakers.

CAUTION

• DO NOT connect more than one speaker to one

speaker terminal.

• The speakers of this product are magnetically

shielded, but color irregularities may occur on
the TV depending on how the speakers are
installed. Keep in mind the following.
1. Turn off the main power of your TV before

installing the speakers. Wait for about 30
minutes before turning on the TV again.

2. If color irregularity occurs in pictures, keep a

distance of more than 10 cm (3

inches)

between the TV and the speakers.

NOTE

• Impedance of speaker that can be connected to the

main unit is within a range of 4

Ω

to 16

Ω

• In order to have a sufficient cooling effect, leave a

space of more than 1 cm (

inches) between the

main unit and the speakers or other objects.

Connecting speakers

SPEAKERS

Speaker terminal

Speaker cord

(supplied)

Speaker cord
(supplied)

Without black line

Without

black line

With black line

With black

line

Right speaker

(rear panel)

Left speaker

(rear panel)

Main unit

(rear panel)

Speaker
grille

Speaker grille can be detached.

Getting started

FS-Y1[J].book Page 9 Monday, January 31, 2005 12:04 PM

Summary of Contents for FS-Y1

























































































Search results

Summary of Contents for FS-Y1

Reviews:

Related manuals for FS-Y1

Brands by name

Popular brands

JVC FS-Y1, Instructions Manual

Search results

Summary of Contents for FS-Y1

Reviews:

Related manuals for FS-Y1

Brands by name

Popular brands