JVC FS-Y1 Instructions Manual Download

Page: 14 / 88

(Refer to page 17 for playing MP3/WMA and JPEG.)

• The power will be turned on when any of PLAY

, FM, AM, AUX, or

on the main unit and

DVD/CD

, FM, AM, AUX, or

OPEN/CLOSE

on the remote control is pressed while the power
is off.
If any button other than

OPEN/CLOSE is

pressed, the source will also be changed (if
there is a disc loaded, playback will start).

NOTE

• A menu screen may be displayed on the TV after

starting playback of a DVD/VCD/SVCD. In this
case, select a desired item to playback by using the
following buttons on the remote control.
• Select a desired item using cursor

∞

and

press ENTER.

• Select a desired item using the number buttons.

• Depending on the disc, actual operation may be

different from the description.

Playback

page 5

Place a disc with the label side
facing up.

•

Place an 8 cm (3

inches)

disc in to the hollow part in
the cen

ter.

Press AUDIO.

• The power will be turned on and the STANDBY

lamp will go off.

• Press

AUDIO again to turn off the power.

Press

OPEN/CLOSE to open the disc

tray to load a disc.

Press DVD/CD

The disc tray will close and playback will start.

Screens displayed on the TV when the power is turned ON.

The following messages appear depending on the status of the system.
(When FM, AM or AUX is selected as a source, the messages do not appear.)

Appears when the system is reading the disc information. Wait for a while.

Appears when the Region Code of the DVD VIDEO does not match the code
the system supports. (page 3)

Appears when no disc is loaded.

Appears when opening the disc tray.

Appears when closing the disc tray.

Appears when trying to play back an unplayable disc.

NOW READING

REGION CODE
ERROR!

NO DISC

OPEN

CANNOT PLAY THIS
DISC

Playing discs

FS-Y1[J].book Page 12 Monday, January 31, 2005 12:04 PM

Summary of Contents for FS-Y1

























































































Search results

Summary of Contents for FS-Y1

Reviews:

Related manuals for FS-Y1

Brands by name

Popular brands

JVC FS-Y1, Instructions Manual

Search results

Summary of Contents for FS-Y1

Reviews:

Related manuals for FS-Y1

Brands by name

Popular brands