JVC EXAD KD-AV7000 Instructions Manual Download Page 9

Page: 9 / 352

ENGLISH

Preparation (Remote Controller—RM-RK220)

WARNINGS on the battery:

• Store the battery in a place where children

cannot reach. If a child accidentally
swallows the battery, consult a doctor
immediately.

• Do not recharge, short, disassemble, or

heat the battery or dispose of it in a fire.
These behaviors may cause the battery to
be overheated, crack or fire.

• Do not leave the battery with other

metallic materials. Doing this may cause
the battery to give off heat, crack, or start
a fire.

• When throwing away or saving the battery,

wrap it in tape and insulate; otherwise, the
battery may be overheated, crack or fire.

• Do not poke the battery with tweezers or

similar tools. Doing this may cause the
battery to be overheated, crack or fire.

CAUTION:

DO NOT leave the remote controller in a
place (such as dashboards) exposed to direct
sunlight for a long time. Otherwise, it may
be damaged.

(back side)

Lithium coin battery
(CR2025)

With the + side facing upwards

DO NOT expose the remote sensor on the
control panel to strong light (direct sunlight
or artificial lighting).

08-11_KD-AV7000[J]f.p65

9/28/04, 7:26 PM

Summary of Contents for EXAD KD-AV7000

































































































































































































































































































































































Search results

Summary of Contents for EXAD KD-AV7000

Reviews:

Related manuals for EXAD KD-AV7000

Brands by name

Popular brands

JVC EXAD KD-AV7000, Instructions Manual

Search results

Summary of Contents for EXAD KD-AV7000

Reviews:

Related manuals for EXAD KD-AV7000

Brands by name

Popular brands