JVC EXAD KD-AV7000 Instructions Manual Download Page 119

Page: 119 / 352

ENGLISH

○ ○ ○ ○ ○ ○ ○ ○ ○

Displaying the disc text

○ ○ ○ ○ ○ ○ ○ ○ ○

information

With Auto Scroll or Scroll selected, you can
display the text and scroll it on the monitor if it
is long and cannot be displayed at a time.

• Scroll:

Text on the information area
scrolls once.

• Auto Scroll: Text on the information area

scrolls every 5 seconds.

• Off:

The information area goes off
(no text information will be
shown).

○ ○ ○ ○ ○ ○ ○ ○ ○

Displaying the time information

○ ○ ○ ○ ○ ○ ○ ○ ○

• TIME:

Elapsed playing time of the current
chapter/track

• REM:

Remaining time of the current
chapter/track

• TOTAL: Elapsed title time (for DVD)

Elapsed disc time (for other discs)

• T.REM: Remaining title time (for DVD)

Remaining disc time (for other
discs)

(For MP3)

TOTAL

T.REM

REM

TIME

(For CD)

Off

Auto Scroll

Scroll

○ ○ ○ ○ ○ ○ ○ ○ ○

Selecting playback modes

You can use only one of the following playback
modes at a time—Repeat Play, Random Play,
and Intro Scan.
• For VCD: While PBC is not in use.

Repeat Play

You can repeat playback.
• Repeat Play can be deactivated only for DVD.

When playing DVD:

When playing VCD/CD:

When playing MP3:

REPEAT PLAY TRACK

REPEAT PLAY OFF

REPEAT PLAY CHAPTER

REPEAT PLAY TITLE

REPEAT PLAY OFF

REPEAT PLAY TRACK

REPEAT PLAY FOLDER

REPEAT PLAY OFF

REPEAT PLAY
• CHAPTER:Repeats the current chapter.
• TITLE:

Repeats the current title.

• TRACK:

Repeats the current track.

• FOLDER: Repeats the current folder.
• OFF:

For DVD: Cancels Repeat Play.
For VCD/CD/MP3:

Repeats the disc.

30-35_KD-AV7001[E]f.p65

9/28/04, 9:13 PM

Summary of Contents for EXAD KD-AV7000

































































































































































































































































































































































Search results

Summary of Contents for EXAD KD-AV7000

Reviews:

Related manuals for EXAD KD-AV7000

Brands by name

Popular brands

JVC EXAD KD-AV7000, Instructions Manual

Search results

Summary of Contents for EXAD KD-AV7000

Reviews:

Related manuals for EXAD KD-AV7000

Brands by name

Popular brands