JVC EXAD KD-AV7000 Instructions Manual Download Page 144

Page: 144 / 352

ENGLISH

To operate the car switches behind the
monitor,

press OPEN once.

The monitor change its angle to the illustrated
position for about 30 seconds.

To return to its
previous angle
within 30 seconds,
press OPEN again.

○ ○ ○ ○ ○ ○ ○ ○ ○

Removing the monitor

When detaching and attaching the monitor,
observe the following:
• Be careful not to drop the monitor.
• Be careful not to damage the connectors.

To detach the monitor

The monitor goes back into
its compartment if it has
been used, then comes out
halfway.

Insert the blind cover to protect the
internal mechanism from dust.

To attach the monitor

Insert the monitor into the compartment with
the screen facing down.

Hold

○ ○ ○ ○ ○ ○ ○ ○ ○

Changing the monitor position/

○ ○ ○ ○ ○ ○ ○ ○ ○

angle

You can change the monitor position and the
monitor angle.
• Once you change them, they are stored. The

monitor opens at the stored position and
angle, next time you eject the monitor.

To change the monitor position

To change the monitor angle

Each time you press the button, the monitor
changes its angle step by step.
• By holding the button (+/–), you can easily

change the angle to its extreme (+/–).

AVOUT VOL

On the remote controller

On the main unit

MAIN

SUB

then

On the main unit

58-60_KD-AV7001[E]f.p65

9/28/04, 9:21 PM

Summary of Contents for EXAD KD-AV7000

































































































































































































































































































































































Search results

Summary of Contents for EXAD KD-AV7000

Reviews:

Related manuals for EXAD KD-AV7000

Brands by name

Popular brands

JVC EXAD KD-AV7000, Instructions Manual

Search results

Summary of Contents for EXAD KD-AV7000

Reviews:

Related manuals for EXAD KD-AV7000

Brands by name

Popular brands