JVC EXAD KD-AV7000 Instructions Manual Download Page 111

Page: 111 / 352

ENGLISH

Before performing any operations, observe
the following...

• For DVD playback, change the Setup

Menu setting (see page 48).

• If “

” appears on the monitor, the disc

cannot accept the operation you have tried.
– In some cases, “

” is not display, but

operations will not be accepted.

Insert a disc

The unit turns on, then draws the disc, and
starts playback automatically.
• The monitor does not come out from its

compartment if “AUTO OPEN/CLOSE” is
set to “OFF” (see page 51).
If the monitor does not comes out...

• It take several seconds for the unit to detect

a disc type.

• If a disc menu appears, see page 30.

Adjust the volume

Operate the disc

: Selects the folder (only for

MP3).

: Stops (see “Stopping play” on

page 82).
• VCD/CD/MP3 playback will

continue endlessly until you
stop it.

: Starts playback.

: Pauses. To resume playback,

press

: Goes back to the beginning of

the current chapter/track, then
skips to the previous chapters/
tracks if pressed repeatedly.

: Skips to the following chapters/

tracks if pressed repeatedly.

To stop play and eject the disc:

Basic Disc Operations

Volume level appears.

Sticker

Sticker
residue

Disc

Stick-on
label

Warped
disc

Do not use the following discs:

25-29_KD-AV7001[E]f.p65

9/28/04, 9:13 PM

Summary of Contents for EXAD KD-AV7000

































































































































































































































































































































































Search results

Summary of Contents for EXAD KD-AV7000

Reviews:

Related manuals for EXAD KD-AV7000

Brands by name

Popular brands

JVC EXAD KD-AV7000, Instructions Manual

Search results

Summary of Contents for EXAD KD-AV7000

Reviews:

Related manuals for EXAD KD-AV7000

Brands by name

Popular brands