9
Front panel
1
Speakers
(stereo)
The speakers emit the same audio signal emitted from the
AUDIO (MONITOR OUT) terminals.
(
☞
7
“AUDIO MONITOR OUT (OUT 1, OUT 2) terminals (pin jack)”
on page 8)
2
VOLUME adjustment knob
Adjusts the volume.
3
Picture adjustment knob
PHASE:
Adjusts the picture hue.
CHROMA:
Adjusts the picture color density.
BRIGHT:
Adjusts the picture brightness.
CONTRAST:
Adjusts the picture contrast.
●
PHASE and CHROMA cannot be adjusted for certain signal
formats.
●
When “COMPONENT PHASE” is set to “DISABLE” and an
NTSC signal is input, PHASE can be adjusted (
☞
page 18).
Tally lamp
This lamp is controlled by the tally function of the MAKE/TRIGGER terminal.
• You can select the color of the tally lamp from “GREEN” or “RED.”
(
☞
“TALLY SELECT” in “FUNCTION SETTING” on page 18 and “External Control” on page 22)
• “NO EFFECT” is displayed when you press a button which is not available for the current input or signal format (the lamp lights even
when the function does not actually work).
• You cannot use the buttons for the items controlled by the MAKE system (“REMOTE ON” appears, and the lamp does not light up).
4
MUTING
button
Turns off the sound when no menu screen is displayed (Muting).
●
To cancel the function, press the button again or turn the
VOLUME adjustment knob.
●
Muting function is also canceled when “BALANCE” of “AUDIO
SETTING” in the MAIN MENU is changed (
☞
page 16).
5
/ / / buttons
When a menu screen is displayed
Selects or adjusts menu items (
☞
“Menu Operations” on page
13).
When no menu screen is displayed
Selects the audio channels of EMBEDDED AUDIO signals
(
☞
“Audio Channel Selection” on page 11).
●
Pressing button while holding button displays the SET-UP
MENU (
☞
“Menu Operations” on page 13).
Daily Operations
DTV21G11̲LCT2681.indb 9
DTV21G11̲LCT2681.indb 9
12.2.5 10:16:46 AM
12.2.5 10:16:46 AM
